FAZER Drifting Seal Kit - O-Rings Kyosho W5018B  [KY-W5018B]

Kyosho W5018B - O-Ring Set
Price:
AUD$9.03
Brand:
Kyosho
Model:
KY-W5018B
GTIN:
4548565509355
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $8.01 each $2.03 or 11%
3+ $7.61 each $4.25 or 16%
Write a review

O-Ring Pack for FAZER Drift

The Kyosho W5018B O-Ring Set acts as a spare parts pack for Kyosho FAZER on-road cars, with direct application to FAZER Drift builds. Use the set to refresh worn sealing elements found in scale on-road drivetrains and small linked assemblies during scheduled maintenance.

Fitment is determined by FAZER series component numbering; check your vehicle's parts diagram before purchase to confirm correct sizes. This pack is a maintenance item and not a performance modification, intended to restore original sealing where O-rings are fitted in couplings, joints, and small rotating parts typical of FAZER chassis designs.

How to fit: remove the affected component, wipe away old grease and debris, then fit the new O-rings without twisting or stretching. A dab of assembly lube helps seat the ring cleanly. Reassemble and confirm free movement and proper sealing before running the model.

Maintenance benefits: while O-rings do not affect handling, keeping seals intact prevents lubricant loss and stops dirt ingress, which helps sustain consistent drivetrain response and reduces premature wear on bearings and gears.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which FAZER parts call for these O-rings?

These O-rings are intended for locations specified in FAZER On-Road Series and FAZER Drift parts lists. Refer to your model's exploded view to identify the exact positions that use O-ring seals.

Will replacing O-rings reduce drivetrain noise?

Fresh seals can help maintain proper lubrication and keep contaminants out, which may reduce irregular noises caused by dry or contaminated bearings and gears, though O-rings themselves do not directly silence the drivetrain.

Can I use a stronger lubricant with these O-rings?

Use a light assembly lube for installation. Heavier lubricants can be used where specified by your drivetrain components, but avoid excess that may attract grit and shorten seal life.

Copyright © 2008-2026 rcjaz.com.au All rights reserved