FAZER Mk2 FZ02 Rear Red LED Duo Kyosho 97054-2R-C  [KY-97054-2R-C]

Kyosho 97054-2R-C - LED Light Unit (?5/2 Bulbs/L=400/Red)
Price:
AUD$0.00
Brand:
Kyosho
Model:
KY-97054-2R-C
GTIN:
4548565525164
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review
alt="Kyosho 97054-2R-C - LED Light Unit (?5/2 Bulbs/L=400/Red)" title="Kyosho 97054-2R-C - LED Light Unit (?5/2 Bulbs/L=400/Red)"

Rear red LED duo for FAZER Mk2

The Kyosho 97054-2R-C LED light unit offers a compact pair of red LEDs tailored to Kyosho FAZER On-Road Series Mk2 FZ02 chassis. The unit connects into an open receiver slot and ships with extension cords so you can add more lights along the same wiring run.

To fit the kit, route the lamp leads to a free Rx open slot, secure the module on the chassis using tape or a small bracket, and use the included extension cords to space extra lights or reach a central power/control socket. The red LEDs are intended for rear or marker lighting on on-road models.

Because the assembly ties into the receiver area, verify your model's available slots and routing clearance prior to final mounting to avoid wires rubbing on suspension or steering linkages. This item is a visual accessory and does not affect chassis or drive mechanics.

A practical, expandable red LED pair for FAZER Mk2 users who want simple lighting that can be extended with included cords.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will adding these LEDs affect radio reception or battery life?

The LEDs draw minimal current and should not noticeably reduce runtime. They connect to the receiver area and, when wired correctly, do not interfere with radio reception; keep antenna routing clear of the light wiring for best results.

Can I adjust brightness or modify the lights for styling?

Brightness adjustment requires adding a compatible LED controller or resistor in-line with the supply. Any modifications should be secured and insulated to avoid short circuits and maintain tidy wiring.

Does chaining multiple sets change the electrical load?

Each additional set increases total current draw slightly. Check your receiver and power source capacity before chaining many units and route cables to avoid signal or power strain.

Copyright © 2008-2026 rcjaz.com.au All rights reserved