For Auper D6 Front Stabilizer Link Damper - SAK-D6807B/BU by 3Racing  [SAK-D6807B/BU]

3RACING Auper D6 Front Stabilizer Damper Blue - SAK-D6807B/BU
Price:
AUD$17.03
Brand:
3Racing
Model:
SAK-D6807B/BU
Condition:
Brand New
Write a review

Auper D6 Front Stabilizer Link Damper

This front stabilizer damper is offered as a scale replacement part compatible with Auper D6 kits. It serves as the front stabilizer link that affects roll resistance and the transient behaviour of the chassis during cornering. The part is finished in blue and is produced to fit the Auper D6 mounting layout.

Role and tuning: positioned in the front stabilizer location, the damper alters how rapidly the front end shifts load between sides. Installing a different link allows fine adjustments to understeer/oversteer balance and refines steering response for on-road track driving.

Installation notes: the damper replaces the stock front stabilizer link using the standard Auper D6 attachment points. After fitting, ensure the link moves freely, check alignment, and verify full suspension travel with the car on stands before track testing.

How should I adjust balance after fitting this damper?

Make small incremental changes and test lap times; observe entry and mid-corner behaviour to decide whether to soften or stiffen front roll influence.

Will this affect corner entry more than mid-corner feel?

The link influences both phases, but transient response at entry is often the most noticeable change when altering stabilizer geometry or stiffness.

Should I change other settings when installing?

After fitting, recheck toe, camber and ride height; small complementary adjustments can maximise the effect of the new stabilizer link.

Copyright © 2008-2026 rcjaz.com.au All rights reserved