For R12 World Conversion Short-Type Right Differential Hub, Rear Narrow - R12-24HRN by Yokomo  [R12-24HRN]

Yokomo R12-24HRN Right Wheel Differential Hub for R12 Rear Narrow
Price:
AUD$9.02
Brand:
Yokomo
Model:
R12-24HRN
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - R12 category
Write a review

Right-side short differential hub for R12 rear narrow

This short-type right wheel differential hub is produced for the Yokomo R12 World Conversion rear layout to increase the available rear tread adjustment. Its compact form shifts the outside wheel position to permit fine track-width tuning without significant changes to the rear block or hub carrier.

Fit this hub together with the R12 World Conversion rear parts recommended by Yokomo, such as the world conversion graphite rear axle (R12-24SN?3, 200), the lower brace (R12-04N?1, 900), and the upper brace (R12-03N?900). Carry out careful trial fitting to ensure axle clearance and driveline alignment after altering hub geometry.

On the circuit, the part is intended to help balance cornering grip through small rear track and scrub radius changes; it is an RC-scale component and not designed for full-size vehicles.

Compatible components

  • Yokomo R12 World Conversion
  • world conversion graphite rear axle (R12-24SN?3, 200)
  • lower brace (R12-04N?1, 900)
  • upper brace (R12-03N?900)
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which conversion parts are needed alongside this hub?

Use the hub with the conversion parts listed above, including the world conversion graphite rear axle and the upper and lower braces, to achieve proper fitment and clearance.

Will this change axle alignment?

Changing hub geometry can alter driveline alignment, so perform trial fitting and correct any misalignment before running the model hard on track.

Is special tooling required to fit it?

Standard RC workshop tools are usually sufficient, but careful measurement tools and a clean trial-fit process are recommended to confirm clearance and fit.

Copyright © 2008-2026 rcjaz.com.au All rights reserved