For R/C: Yokomo YOKYS350 Shock Oil #350 Silicone Blend  [YOKYS350]

Yokomo YS-350 - SUPER BLEND SHOCK OIL #350
Price:
AUD$10.08
Brand:
Yokomo
Model:
YOKYS350
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Consistent 350cSt Shock Oil Performance

Marketed as Yokomo YOKYS350 with the #350 viscosity marking, this silicone shock oil is tailored for use inside R/C shock absorbers on cars and buggies. It sets the damping tone in threaded shock bodies and cartridges, affecting compression and rebound cycles while remaining an aftermarket tuning fluid rather than a vehicle product.

The oil is the medium that damps piston movement; changing viscosity alters shock speed and feel. When adjusting, try one viscosity step at a time and evaluate on short runs, concentrating on mid-corner balance, traction transition, and behaviour over successive bumps.

Fit the fluid by disassembling threaded shock cartridges, draining the prior oil, checking pistons and seals, and refilling to the recommended level. Work cleanly and expel air by slowly operating the piston while topping up the oil.

Tuning tip: use 350 for a balanced, slightly firm response and combine oil choice with spring selection and preload adjustments to refine handling. Make small, repeatable changes and confirm results before further alterations.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
The #350 viscosity gives a medium-firm damping response, slowing rebound and compression relative to lighter grades and improving stability at the cost of some compliance.
Match a firmer oil like 350 with stiffer springs for stability on fast tracks, or soften the oil when using lighter springs to preserve compliance. Adjust preload alongside oil changes.
Do a few short runs, note handling shifts, then make incremental tweaks; document each change so you can compare results objectively.

Copyright © 2008-2026 rcjaz.com.au All rights reserved