For TRAXXAS JATO 4X4 VXL: 7075 Front Steering Blocks with Oversized Bearing Interface - TJ021 by GPM  [TJ021]

TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Blocks With Oversize Bearing - GPM TJ021
Price:
AUD$33.27
Brand:
GPM
Model:
TJ021
GTIN:
4894538401158
Condition:
Brand New
Write a review
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Blocks With Oversize Bearing - GPM TJ021" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Blocks With Oversize Bearing - GPM TJ021"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Blocks With Oversize Bearing - GPM TJ021" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Blocks With Oversize Bearing - GPM TJ021"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Blocks With Oversize Bearing - GPM TJ021" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Blocks With Oversize Bearing - GPM TJ021"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Blocks With Oversize Bearing - GPM TJ021" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Blocks With Oversize Bearing - GPM TJ021"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Blocks With Oversize Bearing - GPM TJ021" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Blocks With Oversize Bearing - GPM TJ021"

Heavy-Duty Front Knuckle Upgrade for JATO 4X4 VXL

This is an RC-scale front steering block set engineered for TRAXXAS JATO 4X4 VXL platforms and related models. Crafted from 7075 aluminium, the replacement blocks stiffen the knuckle mounting and the larger outer bearing seat is aimed at cutting play while preserving CVD alignment during rough use.

Supplied with inner 12x18x4 and outer 6x13x4 bearings, the kit provides matched pairs to align with the modified bores and to keep the steering spindle rotation smooth. The focus is on mechanical improvement rather than electronic tuning, making this upgrade ideal for drivers seeking better front-end precision.

Included in the pack

  • Front Steering Blocks - 2pcs
  • Bearing 12x18x4 (inner) - 2pcs
  • Bearing 6x13x4 (outside) - 2pcs

Original Name / Part No:

9037

Compatible Models

  • TRAXXAS 1/8 JATO 4X4 VXL BRUSHLESS-90386-4
  • TRAXXAS 1/8 JATO 4X4 BRUSHLESS-90154-4
  • TRAXXAS 1/10 BIGFOOT 4X4 Brushless Officially Licensed Replica-67134-4
  • TRAXXAS 1/10 4WD FORD F-150 RAPTOR R TRUCK-101076-4
  • TRAXXAS 1/10 Rustler 4X4 Brushless-67164-4
  • TRAXXAS 1/10 Rustler 4X4 VXL-67376-4
  • TRAXXAS 1/10 Slash 4X4 Brushless-68154-4
  • TRAXXAS 1/10 Slash 4X4 VXL EHD-68386-4
  • TRAXXAS 1/10 Stampede 4X4 Brushless-67154-4
  • For use with #9080 upgrade kit:
    TRAXXAS 1/10 RUSTLER 4X4 VXL-67076-4
    TRAXXAS 1/10 4WD HOSS 4X4 VXL 3S-90076-4
    TRAXXAS 1/10 Rustler 4X4-67064-61
    TRAXXAS 1/10 Slash 4X4 VXL-68086-4
    TRAXXAS 1/10 Slash 4X4-68054-61

Fitting these 7075 alloy blocks reduces steering play and helps sustain correct front-end geometry, which is particularly beneficial when you run higher-power setups or larger, heavier wheels.

How will TJ021 affect steering response and cornering?

Installing these alloy blocks typically produces a sharper steering response and less wandering during cornering, because the stiffer knuckle mounting keeps geometry consistent under load.

Is there any tuning I should do after fitting these blocks?

After installation check toe and camber where applicable, and confirm steering end points on your transmitter. Small trim adjustments may be required to suit the firmer steering feel.

Will these cope with higher-power brushless drivetrains?

Yes, the 7075 aluminium construction and larger bearing interface are intended to resist movement that can occur when heavier loads are applied, improving reliability with more powerful setups.

Do these require additional maintenance compared with the plastic originals?

Maintenance is similar: keep bearings clean and lubricated as needed, and periodically inspect for bearing wear or loosening fasteners after heavy use.

Copyright © 2008-2026 rcjaz.com.au All rights reserved