Front 1/10 Buggy Tyre (2wd) Mounted on White Rim Serpent SER214017  [SER214017]

Serpent SER214017 1/10 buggy Tyre mounted on white rim 2wd front med
Price:
AUD$0.00
Brand:
Serpent
Model:
SER214017
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

1/10 Front Tyre Pre-Fitted on Rim

The Serpent SER214017 tyre is supplied factory-fitted to a white 1/10 rim for front placement on 2wd buggies and is intended solely as an RC accessory. The medium tread profile is chosen to moderate initial steering bite while maintaining usable life on mixed surfaces.

Pre-mounting removes the need for initial glue and seating, so fitting is mainly wheel attachment and a final bead check. Make sure the front wheel hex is correct for your model and confirm centring to avoid pull on first runs.

Tuning impact: front tyre choice changes turn-in and steering feedback. A medium tread front will usually soften overly sharp steering; alter toe, camber or shock damping to fine tune handling before changing tyre compound.

Will this tyre change my steering feel?

Yes. As a medium tread front tyre it tends to reduce initial bite compared with softer compounds, producing a more forgiving turn-in.

Do I need to adjust my suspension when fitting these?

Minor suspension tweaks can help. Try small toe or shock damping changes first to regain desired steering balance before altering tyre choice.

Are there recommended run-in checks?

After the first few laps check bead seating and wheel retention, and re-torque the hex to ensure nothing has moved during initial runs.

Copyright © 2008-2026 rcjaz.com.au All rights reserved