Front Body Mount Upgrade for Mini-Z MR-04 (JAGUAR XJR-14) - Kyosho MZN239-2  [KY-MZN239-2]

Kyosho MZN239-2 - Front body mount (JAGUAR XJR-14)
Price:
AUD$8.13
Brand:
Kyosho
Model:
KY-MZN239-2
GTIN:
4548565518470
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $6.15 each $3.95 or 24%
3+ $5.54 each $7.77 or 32%
Write a review

Mounting piece for Mini-Z Jaguar front section

This Kyosho MZN239-2 front body mount serves as a replacement mounting point for the JAGUAR XJR-14 Mini-Z body when installed on a Mini-Z MR-04 chassis. It secures the front of the polycarbonate shell to the MR-04 frame, helping to preserve intended fit and alignment during driving and setup adjustments.

The mount is intended for simple replacement so you can recover true body position after wear or slight damage without affecting the chassis geometry. Use it to re-establish the baseline for gap settings and aerodynamic tuning so setup changes remain repeatable.

Installation notes: remove the body from the chassis, inspect any fasteners or clips, transfer reusable hardware, and trial-fit the body before final tightening to avoid twist. Minor trimming around paint or added tabs may be needed for clearance but avoid altering the mounting footprint.

Where possible keep original fasteners and confirm body seating following a few test runs to ensure a reliable fit and consistent handling while tuning.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does replacing the mount affect aerodynamic setup?

Restoring the correct mounting point ensures the body sits as designed, which keeps aero adjustments predictable so wing and gap changes behave as intended.

Will changing the mount require re-tuning?

Minor trim and a quick check of gaps are usually sufficient; you may want to verify balance and make small setup tweaks if the previous mount was significantly worn.

Is the replacement precise enough for competitive tuning?

Yes, the part restores factory alignment points so tuning adjustments remain consistent, provided the mount is fitted correctly and hardware is secured.

Any trimming tips for painted bodies?

Trim minimally around mounting tabs and test-fit repeatedly to avoid removing too much material, which could change body seating and affect tuning results.

Copyright © 2008-2026 rcjaz.com.au All rights reserved