Front Shock Coil Spring 13mm Yellow 4.1lbs Serpent 500911  [SER500911]

Price:
AUD$0.00
Brand:
Serpent
Model:
SER500911
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Adjust front-end response

The Serpent 500911 front shock coil is a 13mm spring rated at 4.1lbs and finished in yellow, intended to give a firmer front suspension option for precise setup changes.

Installed as the primary spring element, it modifies ride frequency and initial compliance. It is useful when adjusting roll stiffness, improving turn-in, or setting ride height via preload adjustments on compatible shock units.

Installation notes and setup tips:

  • Ensure the spring is properly seated on the lower retainer and aligned around the shock shaft to prevent binding during travel.
  • Make small preload adjustments and evaluate performance on the circuit to measure changes in front grip and response.
  • Balance spring changes with shock oil and piston tuning to achieve the desired handling rather than relying on spring rate alone.

How will this spring alter my car on-track?

Fitting the 4.1lbs front spring increases front roll stiffness, which typically tightens turn-in and reduces body roll through corners.

Best practice for fitting the spring?

Fit the spring squarely on the retainer, check for any binding, and make incremental preload changes while logging lap feel.

Should I change oil when I change springs?

Yes. Altering spring rate changes dynamic response, so review shock oil weight and piston choice to maintain balanced damping.

Copyright © 2008-2026 rcjaz.com.au All rights reserved