Front Split Upper Deck compatible with ARC A11, Graphite 1.6mm - O-ARCP05S by Factory Pro  [FP-O-ARCP05S]

Price:
AUD$17.49
Brand:
Factory Pro
Model:
FP-O-ARCP05S
Condition:
Brand New
Write a review

Tuning intent for the ARC A11 front split deck

This split upper deck fits the ARC A11 platform and is made from 1.6mm graphite to reduce front-end flex. The lighter, stiffer layout is aimed at drivers who want to tighten turn-in and increase steering precision during setup work.

It attaches at the stock upper-deck mounting points so the chassis geometry remains unchanged. For best results, align the deck carefully and torque screws evenly to avoid introducing asymmetric loads that could affect handling.

When evaluating this deck as part of a setup program, change only one parameter at a time and record lap times and driver feedback to determine the deck's effect on understeer or oversteer characteristics.

How should I evaluate handling after fitting this deck?

Perform controlled lap tests with baseline settings, then fit the deck and run the same tests. Note changes in turn-in, mid-corner balance, and exit stability to decide further adjustments.

Is this best used with other chassis changes or alone?

Start by installing the deck alone so you can isolate its effect. Once familiar with its influence, combine it with spring or damper adjustments to fine-tune overall balance.

What track conditions benefit most from this upgrade?

Tracks that reward responsive turn-in and precise steering often benefit most. On very low-grip or bumpy surfaces you may need to soften other elements to retain traction after fitting the stiffer deck.

Copyright © 2008-2026 rcjaz.com.au All rights reserved