This Yokomo YOKRP-083G front spring is an RC-scale coil spring developed for use in off-road front shock systems. Its green finish serves as a visual rate marker when you maintain multiple springs, and the part functions as a replacement or tuning element for front shock absorbers on off-road RC cars.
To fit the spring, follow common oil-shock procedures: remove the shock cap and the top retainer, replace the spring while retaining the original preload and spacing, then reassemble and inspect travel and end-stops. Observe routine shock maintenance to protect seals and keep shock oil clean when switching springs.
Springs establish the baseline ride stiffness and initial responsiveness. A stronger spring increases roll resistance and initial ride height, whereas a softer spring improves compliance on bumpy surfaces. Use the green spring alongside oil choices, piston setup, and preload adjustments to fine-tune the front-end balance.
Copyright © 2008-2026 rcjaz.com.au All rights reserved