Front Weight Block for TRF201 / DN-01 - Tamiya 54439  [54439]

Tamiya 54439 - RC TRF201/DN-01 Suspension Weight Block (0 degree) OP.1439 OP-1439
Price:
AUD$47.33
Brand:
Tamiya
Model:
54439
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Product overview: suspension weight block

This suspension weight block is offered by Tamiya under part number 54439 and is intended as a replacement for the kit N3 suspension pieces on TRF201 and DN-01 chassis. The 0 degree block shifts mass forward of the front suspension mounts to alter front-end feel.

The box contains the metal weight block plus the mounting plate and bushings that take the place of the original plastic N3 parts. The upgrade firms the front end and produces a small increase in front wheel traction while leaving suspension geometry unchanged. Total mass as supplied is around 30g.

Fitting is a direct replacement on TRF201 or DN-01 frames using the existing mounting holes; no chassis alterations are required. Use common RC hand tools to remove the original parts and install the metal block and plate, then confirm ride height and steering trim before running.

When tuning, the extra mass and rigidity at the nose will change front grip and can help reduce understeer or steady the car at corner entry depending on your setup. Make incremental changes and revert to kit parts if the result is not favourable.

Specifications

  • Item Suspension weight block (0 degree), includes suspension plate and bushings, approx 30g total
  • Material Metal
  • Model Number 54439
  • Compatibility TRF201, DN-01 chassis

For TRF201 and DN-01 owners wanting to experiment with front-end balance, the Tamiya 54439 weight block is a compact, reversible option to trial increased front traction and stiffness.

Do I need special tools to install this part?

No special tools are required. Standard RC hand tools are sufficient to remove the kit N3 components and fit the metal block and plate on TRF201 and DN-01 chassis.

Will this change suspension geometry?

No. The block replaces the N3 parts without altering suspension geometry; it primarily adds mass and stiffness ahead of the front mounts.

How will handling be affected at high speed?

At higher speeds the added nose mass and rigidity can stabilise the car through entry and mid-corner, but it may also alter turn-in feel. Test gradually to find the right balance for your setup.

Is the upgrade reversible?

Yes. The metal block and plate are a direct replacement for the kit N3 parts and can be swapped back to the original components if you prefer the stock handling.

Copyright © 2008-2026 rcjaz.com.au All rights reserved