FUBS3285 Futaba Upper & Bottom Replacement Shells for S9351/S9155  [FUBS3285]

FUTABA S9351 S9155 UPPER/BOTTOM SERVO CASE SET BS3285
Price:
AUD$6.46
Brand:
Futaba
Model:
FUBS3285
GTIN:
4513886303388
Condition:
Brand New
Write a review

Enclosure Replacement Details

The Futaba FUBS3285 upper and bottom shells are manufactured as replacement housings for the Futaba S9351 and S9155 servos. They are intended to restore the external casing and preserve the internal layout rather than alter any electronic functions.

Fitment is specific to the S9351 and S9155 models; confirm compatibility before attempting to install on other units. The shells are built to shield gears and maintain internal alignment for routine servicing tasks.

When fitting the shells, transfer internals carefully, double-check gear mesh and axial play, and secure screws to the recommended torque. After reassembly, validate servo travel and centring with your transmitter or a testing tool.

Will these replacement shells protect the gears in a crash?

The shells provide the same external protection as the originals. They help protect internal components from minor impacts, but severe crashes can still damage gears or electronics regardless of the shell.

Are the replacement shells weather resistant?

These shells restore the mechanical enclosure but do not guarantee full waterproofing. If you need water resistance, check seals and gaskets on your particular servo and add appropriate sealing measures.

Do the shells change the servo weight noticeably?

Replacement shells are intended to match the original housing weight closely. Any difference is typically negligible, but if precise weight is critical for set-up, weigh the servo after reassembly to confirm.

Copyright © 2008-2026 rcjaz.com.au All rights reserved