6EXAP 6-Channel PCM 35Mhz/ R146IP Futaba [6EXAP_c10]

Price:

AUD$194.09

Brand:

Futaba

Model:

6EXAP_c10

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

Futaba made 6-Channel PCM 35Mhz/ R146IP (6EXAP) Flight Transmitters System

FEATURES:

Aileron, Elevator and Rudder double rate switch - Use this switch to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses may be arranged you choose, but generally speaking, once the switch is ��up�� the throws are greater (��high rate��) so when the switch is ��down�� the throws are less (��low rate��). This switch additionally flips between exponential prices (if utilized).
Flap control dial/Channel 6 - This dial runs the servo attached to channel 6 into the receiver if for example the model has flaps here is the control useful to run them.Aileron/elevator control stick -Mounting point for optional neck strap.
Trim levers (all) -Used to move the basic or center host to every servo as labeled in the diagram.
Asking jack - Port for asking the transmitter batteries using the included battery power charger.
On-off switch
INFORMATION INPUT lever - always exchange the values linked to the different functions displayed regarding LCD screen.
Liquid-crystal display (LCD) - shows programming modes and values joined up with.
MODE key - always scroll through and show the ten or eleven(PCM) various functions.
SELECT key - accustomed show the values the current function.
Throttle-cut switch - to work with the throttle-cut function, reduced the throttle stick entirely, then drive the throttle-cut key to completely shut the carburetor and shut of this motor.
Throttle/rudder control stick - runs the servos linked to channel 3 (throttle) and channel 4 (rudder) in the receiver.
Trainer switch - Operates the trainer functions. To get results as a trainer switch the transmitter should really be linked to another transmitter via. a trainer cable (available individually).
Retractable landing gear switch/Channel 5 - change runs the servo associated with channel 5 in receiver should your model has retractable landing gear this is actually the control always expand and retract kit.
Antenna - Radiates signals towards the receiver. Never ever fly a model without completely extending the antenna or perhaps you may create disturbance to many other modelers and decrease operational sign variety of the transmitter. The antenna might be eliminated and changed with another in the event it is inadvertently broken.

Hot Brands

6EXAP 6-Channel PCM 35Mhz/ R146IP Futaba [6EXAP_c10]