Futaba FUSHORN-C Type C Servo Horn D6mm 4pcs (w/o screw)  [FUSHORN-C]

Futaba Type-C horn key details

The Futaba FUSHORN-C Type-C servo horn is supplied as a set of four and is designed to work with standard Futaba servo outputs. It features a medium circular profile and a D6mm centre hole, making it suitable for common control linkages such as steering arms and throttle linkages on model cars, boats and aircraft.

As the mechanical interface between the servo output shaft and your model's linkage, the horn transfers motion from the servo to the control rod. Mounting screws are not included, so pick screws of the correct length and thread that suit your servo's output and the horn's D6mm centre hole. The slim, standard form makes it convenient for replacements when changing throw or travel settings at the transmitter.

During installation, ensure the horn seats evenly on the servo splines and that it moves freely through the full travel to avoid any binding. Use the transmitter's servo setup options to set neutral position and limits so the servo is not overloaded in normal use.