Futaba ESC w/Reverse #MC401CR  [MC401CR]

Futaba MC401CR ESC w/Reverse
Price:
AUD$158.18
Brand:
Futaba
Model:
MC401CR
Condition:
Brand New
Write a review
Futaba made ESC w/Reverse (MC401CR) Car ESC Motor / ESC / Cooling Fan

This is the Futaba MC401CR Electronic Speed Control with Reverse for motors with 10 turns and above.

FEATURES:

  • SMD MOSFETs with tiniest interior opposition for minimal loss and maximum performance
  • Ahead, Reverse, and Brake operations are linear
  • Reverse operation termination function
  • Temperature and low voltage protection
  • Serial slot interaction with a pc (Futaba CIU-2 Interface, FUTM0951 needed)
  • Serial relationship function-
  • Information signing look over and erase (Information signing memorizes the operating current and power voltage for about 8-minutes at 2nd periods)
  • Variable frequency range settings: 100Hz to 10kHZ (Sets the strain reaction system adjustable regularity range)
  • Dead band: ??2μs ~ ??55μs (basic point range could possibly be set)
  • Low battery power security voltage establishing: 2.5V ~ 6V (Sets the voltage which cuts the production toward engine when the ability voltage is dropped)
  • Present Limiter: 50A ~ 300A (The current limitation for suppressing energy can additionally be set and switched off)
  • Brake mix: 0% ~ 100per cent (Sets the braking system energy regarding the maximum braking system point from neutral)
  • Neutral braking system: 0percent ~ 100% (Brake developing within throttle basic point)

INCLUDES:

Futaba MC401CR Electronic Speed Control with Reverse

NEEDS:

Installing in vehicle and linking to engine, receiver and battery pack NiCd or NiMH battery pack 4 - 6 cells (4.8V - 7.2V)

SPECS:

  • Operating-system: Forward and brake (Resolution 255)
  • Energy requirement: NiCd, NiMH battery power 4~6 cells (4.8 ~ 7.2V)
  • PWM frequency-
  • Forward: 100Hz ~ 10kHz Initial value: 2.5kHz ~ 3kHz
  • Brake: 2kHz
  • BEC voltage: 6V
  • Setting: One-touch switch
  • Present ability: FET rating
  • Ahead: 360A (Momentary load: 440A)
  • Brake: 120A
  • Fuse: 30A
  • Battery reverse protection/overload protection
  • Case size: 1.01 x 1.03 x .51" (25.7 x 26.2 x 12.9mm) (excluding protruding components)
  • Silicone wire measure size: 14AWG equivalent
  • Weight: .39oz (11.2g)

Copyright © 2008-2024 rcjaz.com.au All rights reserved