Gensace 1950mAh 11.1V LiPo Pack XT60H-F - Kyosho GAB2303  [KY-GAB2303]

Kyosho GAB2303 - Gensace LiPo 1950mAh (30C/11.1V/??????/XT60H-F)
Price:
AUD$0.00
Brand:
Kyosho
Model:
KY-GAB2303
GTIN:
4548565525744
Write a review

Overview: 11.1V Gensace LiPo for electric RCs

The Kyosho GAB2303 Gensace LiPo 1950mAh is presented for hobby electric models that accept an 11.1V supply and an XT60H-F discharge connector. Core electrical attributes are listed: nominal voltage 11.1V, capacity 1950mAh, and 30C continuous discharge rating, which indicate typical runtime and voltage response under load but do not include cell count or physical dimensions.

Fitting is straightforward on vehicles designed for 11.1V packs and XT60H-F plugs, yet always check battery bay clearance and ensure correct connector orientation before securing. Use the existing strap or a low-compression mount to avoid pinching the cells, and route the lead where it cannot contact moving suspension or drivetrain parts.

For setup purposes the pack balances run time and mass for sprint formats; the 30C rating keeps voltage drop predictable under moderate loads. Small adjustments to pack location within the chassis will change front/rear balance and can help tune handling without altering mechanical components.

Charging and care follow standard LiPo routines: use a compatible LiPo charger, perform balance charges when possible, store at the recommended storage voltage, and inspect the pack for swelling or damage before and after use. Do not try to repair damaged cells and dispose of them safely according to local regulations.

Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
The pack uses an XT60H-F discharge connector. Connect it to your ESC input, double-check polarity before powering up, and secure the cable so it cannot be tugged or trapped during runs.
Yes, if the connector, capacity and physical fit are compatible with your chassis. Always confirm the battery bay size and consider the impact on weight distribution before swapping packs.
Use a LiPo-capable charger set to 3S (11.1V) and perform balance charging where possible. Charge at a conservative current for unknown or older packs to reduce stress on cells.
Yes. The 1950mAh capacity and 30C rating influence the vehicle's weight and voltage delivery; moving the pack will alter the balance and can change handling and throttle response.

Copyright © 2008-2026 rcjaz.com.au All rights reserved