GF30 Replacement Piston OS4A003200 for O.S. Engine  [OS4A003200]

O.S. ENGINES PISTON GF30
Price:
AUD$43.09
Brand:
O.S. Engine
Model:
OS4A003200
Condition:
Brand New
Write a review

GF30 Piston Details

Model OS4A003200 is a replacement piston listed for use with O.S. Engines GF30 and provides the moving seal that enables compression within the combustion chamber.

During installation, confirm ring orientation and free rotation, clean the skirt and bore thoroughly, and use an appropriate glow-engine lubricant for break-in. Tighten head fasteners to recommended torques and plan rebuilds according to service guidance.

As a maintenance item, piston condition affects compression and ring sealing; swapping in a new OS4A003200 can stabilise idle and smooth power delivery, aiding tuning consistency.

Specifications

  • Item O.S. ENGINES PISTON GF30
  • Material Not specified by manufacturer
  • Model Number OS4A003200
  • Compatibility O.S. Engines GF30 engine

Install the OS4A003200 piston when refurbishing a GF30 engine to restore expected clearances and reliable assembly fit.

Will the OS4A003200 improve tuning stability?

Replacing a worn piston restores compression uniformity, which helps stabilise the engine and makes fine tuning more predictable.

Any special care during break-in?

Use a glow-compatible lubricant and run a conservative mixture during initial hours to seat rings, monitoring for unusual friction or scoring.

Are there common fitment issues to watch for?

Ensure ring gaps and skirt clearance match specification; improper ring seating or contamination in the bore are common causes of poor fitment.

Can I use this piston to replace a damaged unit?

Yes—if the model number matches OS4A003200 and measurements align with your GF30 engine, it is intended for that replacement purpose.

Copyright © 2008-2026 rcjaz.com.au All rights reserved