Gmade GS01 Sawback 88mm Aluminum Front and Rear Shocks by GPM SW088X  [SW088X]

Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X
Price:
AUD$27.05
Brand:
GPM
Model:
SW088X
GTIN:
4894538010039
Condition:
Brand New
Write a review
alt="Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X" title="Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X"
alt="Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X" title="Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X"
alt="Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X" title="Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X"

Upgrade Kit: Aluminum Shocks for Gmade GS01 Sawback

These 88mm aluminum internal shocks are a direct performance upgrade for the Gmade 1/10 GS01 Sawback, also compatible with KOmodo builds. The precision engraved bodies are aimed at reliable damping and a tidy installation outcome.

Core Features of the 88mm Shocks

  • Material: Quality aluminum for improved strength to weight ratio
  • Compatibility: Tailored for Gmade 1/10 GS01 Sawback and KOmodo models
  • Length: 88mm to support optimised suspension travel
  • Design: Internal shock construction with engraved detailing for neat fitment

Practical Advantages

These shocks help reduce pitch and roll during cornering and improve consistency over repeated runs, making them a worthwhile upgrade for serious weekend drivers and club racers.

Compatible Models

  • Gmade 1/10 GS01 Sawback
  • KOmodo

How do I bleed and fill these shocks correctly?

Use a syringe or shock pump to remove air pockets and fill to the recommended level for smooth damping; take care to align shafts before sealing caps.

Will aluminium bodies affect chassis balance?

Aluminum reduces body flex and can slightly lower unsprung mass variance, which typically improves repeatability and steering feel.

Is special mounting hardware required?

These shocks use standard mount patterns for GS01 and KOmodo units, so special hardware is usually not necessary unless you run a custom setup.

Copyright © 2008-2026 rcjaz.com.au All rights reserved