GPM TAMIYA T3-01 Finned 6061 T6 Motor Mount T3018 - Upgrade Part  [T3018]

TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018
Price:
AUD$24.19
Brand:
GPM
Model:
T3018
GTIN:
4894538302479
Condition:
Brand New
Write a review
alt="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018" title="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018" title="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018" title="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018" title="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018" title="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018" title="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018" title="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018" title="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018" title="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018" title="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018" title="TAMIYA T3-01 DANCING RIDER Aluminum Motor Mount With Heat Sink Fins - 5pc set - GPM T3018"

6061 T6 motor mount with heat sink fins

This aluminium motor mount is produced for TAMIYA T3-01 DANCING RIDER rigs and concentrates on motor retention and thermal management in hobby RC use. Fabricated from 6061 T6 aluminium, the component resists bending under typical loads and incorporates fins to increase passive heat rejection area.

Fit and installation follow the T3-01 motor position and bolt pattern using the supplied stainless steel fasteners. The finned profile replaces the standard factory bracket and is intended to transfer heat away from the motor case during longer runs or tuning sessions where thermal build up may occur.

For tuning and setup the mount secures the motor to the gearbox or mounting plate while offering extra cooling without requiring changes to electronics. Always verify alignment and mesh after fitting and retorque screws following a short test run to confirm secure fitment.

Packing includes

  • Motor Mount - 1pcs
  • Stainless Steel Flat Head Screw 3x6 - 2pcs
  • Stainless Steel Round Head Screw 3x10 - 2pcs

Specifications

  • Item: Aluminium motor mount with heat sink fins
  • Material: Aluminium 6061 T6
  • Model Number: T3018
  • Compatibility: TAMIYA T3-01 DANCING RIDER
  • Included: Motor mount and stainless steel screws as listed

A straightforward aftermarket swap designed to improve cooling and provide a firmer motor mounting solution for T3-01 DANCING RIDER models during hobby or tuning use.

Is this designed specifically for T3-01 DANCING RIDER?

Yes, the mount follows the TAMIYA T3-01 motor mounting pattern and is supplied with the screws shown in Packing includes.

Will the mount alter motor alignment?

The mount keeps the same motor position but you should check and fine tune gear mesh and alignment after installation.

Can I use this on other TAMIYA models?

It is made for the T3-01 pattern; other models may differ so confirm bolt pattern and spacing before attempting fitment.

How should I maintain the mount?

Inspect fasteners and clearance regularly, clean fins of debris, and retorque screws after initial runs to maintain stability and cooling performance.

Copyright © 2008-2026 rcjaz.com.au All rights reserved