GPM TRAXXAS E-REVO 65T Steel Spur Gear ER065TS - Upgrade Part  [ER065TS]

TRAXXAS E-REVO Steel Spur Gear (65T) - 1pc set - GPM ER065TS
Price:
AUD$23.76
Brand:
GPM
Model:
ER065TS
GTIN:
4894538261424
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS E-REVO Steel Spur Gear (65T) - 1pc set - GPM ER065TS" title="TRAXXAS E-REVO Steel Spur Gear (65T) - 1pc set - GPM ER065TS"

65T hardened spur for E-REVO

Designed as a single replacement part for TRAXXAS E-REVO electric models, this steel spur gear offers a tougher tooth profile for setups that demand improved wear resistance in the driveline.

Installation guidance: the spur fits onto the transmission output and engages the motor pinion. During installation verify proper mesh and backlash, inspect any slipper clutch or spacer parts, and rotate the drive assembly by hand to confirm free movement before running. Fit shims where required and secure fasteners to recommended torque.

Performance context: swapping to a steel 65T spur is a standard modification for experimenting with gear ratios or when durability is a priority for off-road or high-power use. Monitor pinion tooth condition and bearing play after the first runs.

Specifications

  • Item TRAXXAS E-REVO steel spur gear 65T, 1 pcs
  • Material Steel
  • Model Number ER065TS
  • Compatibility TRAXXAS E-REVO

For anyone tuning or maintaining a TRAXXAS E-REVO drivetrain, this 65T steel spur is a reliable replacement option; always confirm mesh and recheck mating parts after break-in.

Do I need to modify motor mounts to fit this spur?

In most TRAXXAS E-REVO setups no motor mount modification is needed, but check mesh and adjust shims or motor position if the pinion does not seat correctly.

What checks should I perform after installation?

After installation and first short runs inspect pinion and spur teeth for seating, ensure bearing clearance is normal, and retighten any fasteners loosened during bedding in.

Will this handle high-power brushless motors?

Steel spurs are commonly used with higher power setups for improved wear resistance, but ensure your drivetrain bearings and pinion are also suited to the increased loads.

Copyright © 2008-2026 rcjaz.com.au All rights reserved