GPM TRAXXAS X-MAXX Harden Steel #45 Wheel Joints STXM039 - Upgrade Part  [STXM039]

TRAXXAS X-MAXX Harden Steel #45 Front Or Rear Wheel Joints For 6s -2pc set - GPM STXM039
Price:
AUD$31.25
Brand:
GPM
Model:
STXM039
GTIN:
4894538280937
Condition:
Brand New
Write a review
alt="TRAXXAS X-MAXX Harden Steel #45 Front Or Rear Wheel Joints For 6s -2pc set - GPM STXM039" title="TRAXXAS X-MAXX Harden Steel #45 Front Or Rear Wheel Joints For 6s -2pc set - GPM STXM039"
alt="TRAXXAS X-MAXX Harden Steel #45 Front Or Rear Wheel Joints For 6s -2pc set - GPM STXM039" title="TRAXXAS X-MAXX Harden Steel #45 Front Or Rear Wheel Joints For 6s -2pc set - GPM STXM039"
alt="TRAXXAS X-MAXX Harden Steel #45 Front Or Rear Wheel Joints For 6s -2pc set - GPM STXM039" title="TRAXXAS X-MAXX Harden Steel #45 Front Or Rear Wheel Joints For 6s -2pc set - GPM STXM039"

Upgraded wheel joint for X-MAXX drivetrains

This 2 pcs set is an aftermarket wheel joint intended for TRAXXAS X-MAXX models running 6s setups. The part is a replacement-style RC upgrade that helps strengthen the driveline and supplies a firmer axle-to-wheel interface when under heavy load.

The product implements specific dimensional upgrades compared with the stock joint: a CVD body thickness of 1.5mm, a shaft pin sized 0.5mm larger than stock, and an outer diameter increased from 17mm to 18mm to aid rear power transfer. Those changes are aimed at improved stiffness and contact area without changing basic fitment geometry.

Installation uses standard wheel-joint replacement methods on X-MAXX scale vehicles. Consider this part as a tuning choice for firmer power delivery; after install, inspect axle alignment, hub engagement, and clearances before running.

Specifications

  • Item: Harden Steel #45 front or rear wheel joints, 2 pcs set
  • Material: Hardened steel
  • Model Number: STXM039
  • Design Details: CVD body 1.5mm thickness, shaft pin +0.5mm thicker, outer diameter upgraded 17mm→18mm
  • Compatibility: TRAXXAS X-MAXX, 6s setups

As a scale RC spare, STXM039 is aimed at enthusiasts who want a firmer driveline reaction on TRAXXAS X-MAXX machines using 6s power; it provides targeted dimensional upgrades to improve rear power delivery while maintaining stock-style fitment.

Do these work on both front and rear positions?

Yes, the set is suitable for front or rear wheel joints as specified, but confirm orientation during fitment.

Will thicker parts cause binding?

The design preserves basic fitment geometry, but you should check for any binding and verify clearances after installation.

Recommended maintenance after upgrade?

Periodic inspection of pins and joint wear is recommended, especially under frequent 6s use; re-lubricate as needed.

What changes should I expect in handling?

You may notice firmer power transfer and reduced driveline deflection under acceleration, particularly at the rear.

Copyright © 2008-2026 rcjaz.com.au All rights reserved