Aftermarket 56T Spur Gear for TRAXXAS 1/10 2WD SSLA2W056T by GPM  [SSLA2W056T]

TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T
Price:
AUD$27.26
Brand:
GPM
Model:
SSLA2W056T
GTIN:
4894538365818
Condition:
Brand New
Write a review
alt="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T" title="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T"
alt="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T" title="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T"
alt="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T" title="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T"
alt="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T" title="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T"

Durable 56T spur for TRAXXAS 2WD rear gearbox

This 1/10-scale spur gear is a 56-tooth, 0.8 module component intended for driveline use in compatible TRAXXAS 2WD machines. It is CNC machined from hardened black carbon steel to provide greater wear resistance and consistent gear engagement compared with the stock nylon unit. The gear fits in the rear gearbox area to transfer torque from the pinion forward into the drivetrain.

The pack includes the 56T spur and three stainless steel washers to set axial spacing; the gear is built to the 0.8 module specification and engineered to match the listed TRAXXAS 1/10 2WD models. After installing, check mesh alignment, deburr any sharp edges, and ensure bearings and lubricant are correctly in place.

Packing includes

  • Spur Gear 56T - 1pcs
  • Stainless Steel Washer 3*7*0.2 - 3pcs

Original Name / Part No:

4690,4683,4686

Compatible Models

  • TRAXXAS-1/10 ELECTRIC 2WD F-150 SVT RAPTOR-58064-2
  • TRAXXAS-1/10 2WD BANDIT XL-5 BUGGY-24054-1
  • TRAXXAS-1/10 2WD BANDIT XL-5 BUGGY-24054-61
  • TRAXXAS-1/10 2WD BANDIT XL-5 BUGGY-24054-4
  • TRAXXAS-1/10 2WD BANDIT VXL BRUSHLESS BUGGY-24076-74
  • TRAXXAS-1/10 2WD BANDIT VXL BRUSHLESS BUGGY-24076-4
  • TRAXXAS-1/10 2WD SLASH SHORT COURSE TRUCK-58014-4
  • TRAXXAS-1/10 2WD SLASH SHORT COURSE TRUCK-58024
  • TRAXXAS-1/10 2WD SLASH SHORT COURSE TRUCK-58034-1
  • TRAXXAS-1/10 2WD SLASH SHORT COURSE TRUCK-58034-61
  • TRAXXAS-1/10 2WD SLASH VXL SHORT COURSE TRUCK-58076-74
  • TRAXXAS-1/10 2WD SLASH VXL SHORT COURSE TRUCK-58076-4

Ideal as a direct steel upgrade for the compatible TRAXXAS 1/10 2WD models listed; always confirm pinion pitch and clearance before extended running.

Do I need to alter the stock spur housing?

No housing modifications are normally required for the listed models. Fit the gear and use the supplied washers to achieve correct mesh and endplay.

What lubricant should I use?

Use a light gear or bearing-safe grease inside the gearbox. Avoid heavy surface films that could trap debris against the steel teeth.

Will this affect gear ratio or speed?

No change to ratio when replacing with the same tooth count. However, steel can change noise and wear patterns, so confirm mesh and pinion condition.

How should I check for correct mesh?

Fit the gear, place the washers as required, use a marker to check contact patch across several teeth, and rotate by hand to verify even engagement.

Copyright © 2008-2026 rcjaz.com.au All rights reserved