Graphene Pro Low-Profile 2S LiPo 6200mAh for 1/10 Touring - Arrowmax AM-700706  [AM-700706]

Arrowmax AM-700706 AM Lipo 6200mAh 2S TC Low Profile - 7.4V 65C Continuos 130C Burst (Graphene Pro)
Price:
AUD$116.91
Brand:
Arrowmax
Model:
AM-700706
Write a review

Low-profile 2S pack built for modern touring chassis

This Arrowmax AM-700706 2S LiPo is a low-profile, Graphene-enhanced battery designed for RC-scale on-road touring and stock-class use. The pack is specified at 6200mAh with a 7.4V nominal voltage and rated 65C continuous with 130C burst, delivering a low internal resistance and a stable voltage under load to support consistent motor response.

The slim profile helps lower the centre of mass and simplifies fitment into low-battery bays. Confirm connector orientation and clearance in your specific chassis to avoid interference with steering linkages or suspension movement.

For track setup, keep the pack centred and secured, protect leads from fan intakes and moving parts, and consider conservative gear ratios when racing under stock-class limits to make the most of steady voltage delivery.

Specifications

  • Item: LiPo battery pack
  • Capacity: 6200mAh
  • Voltage: 7.4V (2S)
  • C Rating: 65C continuous, 130C burst
  • Dimensions: 139 x 47 x 25 mm
  • Weight: 288 g
  • Material: Graphene Pro cells
  • Model Number: AM-700706
  • Compatibility: Intended for 1/10 touring and stock-class on-road platforms

A solid choice when you need a compact 2S pack with reliable voltage under load; observe all recommended LiPo care and charging rules.

Are these packs legal for club-level racing events?

Regulations differ by club and class. The AM-700706 meets common 2S size and capacity profiles, but always verify event rules for allowed pack types and capacities before racing.

How many cycles can I expect from Graphene Pro cells?

Cycle life depends on charge/discharge rates and care. Gentle charging, avoiding deep discharges, and storing at proper voltage will extend usable cycles compared with aggressive use.

Can I swap the connector to another type?

Yes, swapping to a preferred connector is common. Use the correct gauge wire and soldering technique, and insulate joints properly. If unsure, have a shop perform the conversion.

Does the burst rating mean continuous high performance?

Burst rating is for short-duration peaks. Continuous current should stay within the 65C rating for safe operation to preserve pack life and avoid overheating.

Do Graphene cells need special storage care?

Store at the recommended storage voltage in a cool, dry place and inspect periodically. Graphene chemistry does not change standard LiPo storage best practices.

How should I test for voltage sag under load?

Use a wattmeter or data logger to record voltage and current during a run. Compare readings across packs to evaluate sag and real-world performance differences.

Copyright © 2008-2026 rcjaz.com.au All rights reserved