GT Front Anti-Roll Bar Bulkhead Left — Compatible with GTX 2026, XRAY 352019  [XR-352019]

XRAY 352019 - GT Aluminium Front Anti-roll Bar Bulkhead - Left - Flat Chassis - Swiss 7075 T6
Price:
AUD$54.96
Brand:
XRAY
Model:
XR-352019
Condition:
Brand New
Write a review

Left front anti-roll bar bulkhead engineered for tuning

This left-side aluminium front anti-roll bar bulkhead is an RC-scale upgrade for GT flat-chassis arrangements, developed to stabilise anti-roll bar movement during on-track adjustments. The part focuses on reinforcing bearing seating to decrease unwanted play and help maintain consistent roll tuning outcomes.

Manufactured by precision CNC machining from Swiss 7075 T6 aluminium, the bulkhead strikes a balance of stiffness and durability suited to competitive GT setups. It secures anti-roll bar bearings and routes suspension loads into the chassis, which in turn affects front-end balance and steering feedback as roll stiffness is tuned.

Installation requires removal of the stock left front bulkhead and transfer of any bearings and fasteners to the new part; check the GTX 2026 flat chassis layout for correct alignment before final torqueing. Fit this component to achieve tighter anti-roll bar action and crisper front-end feedback without altering suspension geometry.

Specifications

  • Item: GT front anti-roll bar bulkhead, left
  • Material: Swiss 7075 T6 aluminium
  • Model Number: 352019
  • Compatibility: GTX 2026 flat chassis

Install this CNC-machined aluminium bulkhead to stiffen the front anti-roll bar mounting on GTX 2026 flat-chassis GT cars, improving bearing support and lap-to-lap consistency when tuning.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this bulkhead change my roll stiffness tuning?

The bulkhead provides a firmer mounting for the anti-roll bar bearings, which helps the bar respond more predictably to spring and sway adjustments, making roll stiffness tuning more repeatable.

Do I need different sway bar bushings after fitting this part?

In most cases you can reuse existing bushings, but check for correct clearance and bearing fit; some users swap to firmer bushings to fine-tune response after installation.

Will this affect steering feel at high cornering loads?

By reducing deflection at the bearing mount, the bulkhead helps maintain steering consistency under load, delivering a steadier front-end feel during aggressive cornering.

Is any special tooling required to fit this CNC part?

Standard RC tools are sufficient; remove the original bulkhead, transfer bearings and fasteners, and torque to the chassis manufacturer recommendations for correct installation.

Copyright © 2008-2026 rcjaz.com.au All rights reserved