GT-02G Touring Car Lower Deck, Carbon Graphite - YOKGT-02G by Yokomo  [YOKGT-02G]

Yokomo GT-02G - GT500 Carbon Graphite Lower Deck
Price:
AUD$113.64
Brand:
Yokomo
Model:
YOKGT-02G
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - GT category
Write a review

Lower deck role and handling effects

This carbon graphite lower deck is an RC-scale replacement component for the Yokomo YOKGT-02G family, intended as the main lower plate on GT-02G and GT500 type touring chassis. The part concentrates on boosting chassis stiffness and stability, giving racers a predictable baseline for adjusting roll couple, ride height and weight distribution during setup.

Carbon graphite increases torsional rigidity compared to common plastic plates while maintaining a low mass profile. As a tuning tool the deck interacts with top decks, suspension mount positions and shock settings to influence corner entry and mid-corner behaviour. Always confirm that the deck aligns with your chassis mounting points before final assembly.

Specifications

  • Item: GT500 Carbon Graphite Lower Deck
  • Material: Carbon Graphite
  • Model Number: YOKGT-02G
  • Compatibility: GT-02G, GT500

Install this deck when you want a stiffer platform to refine chassis rigidity and handling balance; double-check fastener lengths and mounting alignment to prevent contact with electronics or limiting suspension travel.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Should I change anti-roll bars after fitting this deck?

A stiffer lower deck typically shifts load transfer, so you may need to soften anti-roll settings or adjust bar thickness to restore desired balance between front and rear.

Will this deck alter corner entry behaviour?

Yes. Increased torsional stiffness sharpens turn-in and can improve mid-corner stability; pairing it with appropriate damper settings helps control any additional initial bite.

Do I need to check electronic clearances?

Always verify that battery, ESC and receiver placement remain clear of the deck edges and mounting hardware after installation to avoid abrasion or shorting risks.

Is special hardware required to fit this part?

Most stock screws will fit, but confirm thread type and length for GT-02G and GT500 mounting holes to prevent overcompression of the composite material.

Copyright © 2008-2026 rcjaz.com.au All rights reserved