GT500 Ball Differential Replacement for 1/10 Touring - YOKGT-24BF by Yokomo  [YOKGT-24BF]

Yokomo GT-24BF - GT500 Ball Differential Assembly
Price:
AUD$124.87
Brand:
Yokomo
Model:
YOKGT-24BF
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - GT category
Write a review

GT500 Ball Diff Summary

The Yokomo YOKGT-24BF GT500 Ball Differential Assembly is a replacement differential unit intended for GT500-style 1/10 touring cars. It modifies torque distribution and center differential response within the GT500 setup and is supplied as an aftermarket component for hobby use.

The assembly installs into the GT500 differential housing and interfaces with the vehicle's internal gearing and axle hardware. As a ball differential, it uses bearing balls and preload control to manage slip rather than relying on fixed gear engagement, which permits finer tuning of traction and handling characteristics.

For installation, align the assembly with the GT500 differential carrier and secure all fasteners at the original mounting points. Adjust differential feel by changing preload settings or using shims where the chassis supports it, and by selecting the correct grease viscosity to achieve the desired slip behavior.

Specifications

  • Item: GT500 Ball Differential Assembly
  • Material: Not specified by manufacturer
  • Model Number: YOKGT-24BF
  • Compatibility: GT500

This assembly suits hobbyists working on GT500 class RC touring cars who want the adjustable characteristics of a ball differential; always verify fitment and keep the unit clean and lubricated for reliable performance.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What are the steps to fit the YOKGT-24BF?

Remove the existing diff, check carrier alignment and seating, place the YOKGT-24BF into the housing and reattach original fasteners. Verify smooth rotation and set preload as required.

Should I change shims when fitting this unit?

Shimming may be necessary to set proper end play and preload. Use thin shims to fine tune and test on-track to confirm the chosen setup.

How often should I service it?

Service intervals depend on running conditions; inspect after heavy sessions, clean and re-grease when contaminants are present, and replace components showing visible wear.

Can I tune handling with grease changes?

Yes. Lighter grease softens the diff for more slip, heavier grease increases lockup feel. Use this method for incremental handling adjustments.

Who stocks replacement components?

Replacement balls, races and other parts are available through Yokomo parts suppliers and specialist RC outlets that carry GT500 spares.

Copyright © 2008-2026 rcjaz.com.au All rights reserved