GT500 Rear Wheel Hub Upgrade for Touring Cars - Yokomo YOKGT-24H  [YOKGT-24H]

Yokomo GT-24H - GT500 Left and Right Rear Hub
Price:
AUD$14.31
Brand:
Yokomo
Model:
YOKGT-24H
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - GT category
Write a review

GT500 hub technical notes

The Yokomo YOKGT-24H left and right rear hubs are RC-scale components made to be compatible with GT500 chassis. They act as the interface between the rear wheel assembly and suspension, helping to maintain repeatable wheel position and alignment during setup changes.

Suitable for direct replacement or performance-oriented upgrades in GT500 touring builds, these hubs influence rear camber, toe and roll-center choices during tuning. Installation commonly involves removing the wheel and old hub, fitting the new hub into the hub carrier, and reassembling with the chassis' original fasteners to preserve geometry; check your chassis documentation for model-specific steps.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Yes. Hub geometry and fitment affect roll center and alignment repeatability, which can change rear traction and balance. Combine hub swaps with suspension tuning for best results.
The hubs are intended for direct replacement using the original hardware, so you can reinstall stock parts if desired. Keep original fasteners and bearings to simplify reverting.
Most installations do not require additional shims, but verify wheel offset and hub face clearance. Use shims only if needed to achieve the correct wheel position.

Copyright © 2008-2026 rcjaz.com.au All rights reserved