GT500 Replacement Battery Holder - YOKGT-32 by Yokomo  [YOKGT-32]

Yokomo GT-32 - Battery Holder Set for GT500
Price:
AUD$23.76
Brand:
Yokomo
Model:
YOKGT-32
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - GT category
Write a review

Installation guide for the GT500 holder

The Yokomo YOKGT-32 is an RC battery holder set intended for GT500 chassis configurations. Its purpose is to provide a reliable mounting interface so the battery remains in the correct position for consistent handling and easier servicing.

This component is about mechanical placement rather than electrical features. When fitting, ensure the holder corresponds to your GT500 battery bay and mounting posts, and check for sufficient clearance around the ESC and motor. The set is suitable as a replacement or an upgrade to make battery removal and refitment simpler during maintenance.

To install: remove any existing mount, line up the holder with the GT500 designated mounting holes, and secure with the appropriate hex screws. Confirm the battery sits flush and that any straps or clamps engage to prevent lateral movement under acceleration or cornering loads.

Specifications

  • Item: Battery Holder Set for GT500
  • Material: Not specified
  • Model Number: YOKGT-32
  • Compatibility: GT500

This holder makes battery servicing more efficient while maintaining repeatable placement for predictable chassis behavior; always verify compatibility with your GT500 layout before tightening hardware.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is installation hardware included?

The product description does not list included screws. Expect to use the original GT500 hardware if it matches, or obtain compatible hex screws of the correct length and thread.

Do I need to modify the chassis to fit it?

No chassis modification should be necessary when the holder aligns with the GT500 mounting points. If alignment differs, re-check the mounting pattern before forcing installation.

What checks are recommended after fitting?

After fitting, confirm the battery is seated flush, straps or clamps hold securely, and wiring is clear of the holder. A brief test run followed by a re-check of fasteners is a good practice.

Will this holder suit high-power setups?

The holder is mechanical and does not change electrical performance; ensure your battery and ESC cooling needs are met by checking clearances and ventilation around the mounted pack.

Copyright © 2008-2026 rcjaz.com.au All rights reserved