Hinge Pins for DP-DPR Upper A arm Compatible with Yokomo - YOKD156P  [YOKD156P]

Yokomo D-156P - Hinge Pins for DP-DPR Upper A arm
Price:
AUD$8.16
Brand:
Yokomo
Model:
YOKD156P
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DP category
Write a review

Replacement hinge pins for drift suspension pivots

This RC-scale hinge pin set is intended for the DP-DPR Upper A arm on Yokomo drift packages. These parts act as direct replacement pivot points where the upper A arm rotates on the suspension assembly, reestablishing a secure connection and repeatable geometry without modifying the chassis layout.

Fitment is confined to the DP-DPR Upper A arm mounting points as specified, so do not attempt to adapt them to other components. Installation on stock setups is straightforward: remove the worn pins, position the upper arm, and fit the replacements following the original hardware sequence. Confirm free suspension movement and check for any side-to-side play after refit.

For setup and tuning, fresh hinge pins maintain the intended suspension geometry. Replace them during routine servicing to retain consistent steering response and dependable weight transfer during drift sessions. After changing pins, verify upper arm orientation and pivot clearances against your setup notes to preserve handling characteristics.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How will new hinge pins change handling?

New pins restore precise pivot geometry, which improves steering consistency and ensures more predictable weight transfer during drifting.

Do I need to recheck geometry after installation?

Yes. After fitting the replacements, verify upper arm alignment and pivot clearance against your recorded baseline to keep the handling unchanged.

Is installation difficult for most hobbyists?

No. On standard setups you simply remove the old pins, align the arm, and install the new pins using the original hardware order; then check for smooth movement.

Copyright © 2008-2026 rcjaz.com.au All rights reserved