Hobbywing 30401150 XERUN-3660SD 3200KV Off-Road Truck Motor  [HW-30401150]

HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150
Price:
AUD$0.00
Brand:
Hobbywing
Model:
HW-30401150
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150" title="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150"
alt="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150" title="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150"
alt="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150" title="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150"
alt="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150" title="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150"
alt="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150" title="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150"
alt="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150" title="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150"
alt="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150" title="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150"
alt="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150" title="HOBBYWING XERUN-3660SD-3200KV-D5.0-G2 - 30401150"

Overview of the Hobbywing XERUN-3660SD 3200KV

The Hobbywing XERUN-3660SD 3200KV brushless unit is designed for 1/10 scale heavy short course trucks and monster trucks where durable, controllable power is required. Its sensored arrangement provides consistent throttle feel at low speeds, while the 4-pole configuration helps deliver strong midrange torque for jumps and heavy acceleration.

Timing Adjustment and Chassis Considerations

Adjustable timing from 20 to 40 degrees helps you tune acceleration versus top speed depending on terrain and gearing. The motor measures 36mm in diameter and 62mm long, and at 218g it balances power with manageable weight for most truck setups.

Specifications Overview

  • KV Rating: 3200
  • LiPo Cells: 2-3S
  • No-load Current: 3.7A
  • Resistance: 6.5mΩ
  • Shaft Diameter: 5mm
  • Weight: 218g
You need a pinion that fits a 5mm shaft and matches your chosen spur gear and desired ratio. Check for a secure grub screw fit and correct mesh to avoid premature wear.
Under heavy loads or high timing settings the motor will warm up. Ensure adequate airflow and monitor temperatures during tuning sessions to prevent overheating.
Use a mid-range timing setting as a starting point and adjust based on whether you need more low-end bite for loose surfaces or more top-end for hardpack sections.
Regularly clear dust and grit from the casing, check bearings and wiring, and avoid sustained high-temperature runs. Periodic inspections will keep the motor performing well.

Copyright © 2008-2025 rcjaz.com.au All rights reserved