Hobbywing XRotor Micro 30A ESC 30901077 - Low-Noise FPV Controller  [HW-30901077]

HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077
Price:
AUD$0.00
Brand:
Hobbywing
Model:
HW-30901077
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077" title="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077"
alt="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077" title="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077"
alt="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077" title="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077"
alt="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077" title="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077"
alt="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077" title="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077"
alt="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077" title="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077"
alt="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077" title="HOBBYWING XRotor Micro 30A BLHeli_32 DShot1200 - 30901077"

Small Form ESC for Serious FPV Use

The Hobbywing XRotor Micro 30A ESC, model number 30901077, is a small but capable electronic speed controller tailored to FPV rigs. It uses BLHeli_32 firmware to provide dependable features and tuning freedom for pilots focusing on performance.

Premium Components and Thermal Design

Powered by a 32-bit ARM processor at 48MHz, the ESC employs Fairchild MOSFETs and ceramic capacitors to stabilise power delivery. The 3-in-1 drive ICs and four-layer PCB with 3-ounce copper traces support better heat dissipation and steady operation.

Smooth Throttle and Braking Behaviour

Hardware PWM ensures smooth and predictable throttle response while minimising switching noise. The damped light mode gives regenerative braking and active freewheeling for faster motor slowdown and sharper control in tight manoeuvres.

Configurable Firmware and Safeguards

Running genuine BLHeli_32, the ESC can be configured en masse via Cleanflight or Betaflight. It includes comprehensive protections such as motor stall detection, temperature and current limits, low RPM power control, and undervoltage protection.

Specifications

  • Continuous/Peak Current: 30A / 50A
  • LiPo Cells: 2-5S
  • BEC Output: No
  • Output Wires: Solder tabs
  • Input Connectors: No
  • Output Connectors: No
  • Firmware: BLHeli_32
  • ESC Programming: Supported
  • Stick Programming: BLHeliSuite
  • DEO: Supported
  • Throttle Range Calibration: Supported
  • Oneshot125 Mode: Supported
  • Oneshot42 Mode: Supported
  • MultiShot Mode: Supported
  • Timing: Supported
  • Motor Rotation: Supported
  • Size: 23.8x14.5x5.8mm
  • Weight: 6g

The Hobbywing XRotor Micro 30A ESC is suited to racers and freestyle pilots who need a compact, programmable controller with solid protection and low noise.

Yes, within the current limits of 30A continuous and 50A peak, it is suitable for many high-kv motor and prop combos used in freestyle setups.
No. This ESC does not include a BEC, so you will need a separate regulator or power distribution arrangement to supply your FC or receiver.
The unit weighs about 6g and measures 23.8x14.5x5.8mm, making it easy to fit into tight frames without noticeably affecting centre of gravity.

Copyright © 2008-2025 rcjaz.com.au All rights reserved