HPI Bullet 3.0 Graphite Centre Differential Plate Tuning GBST038B by GPM  [GBST038B]

HPI Bullet 3.0 Mt And St Graphite Center Differential Plate - 1pc - GPM GBST038B
Price:
AUD$11.31
Brand:
GPM
Model:
GBST038B
GTIN:
4894538066395
Condition:
Brand New
Write a review
alt="HPI Bullet 3.0 Mt And St Graphite Center Differential Plate - 1pc - GPM GBST038B" title="HPI Bullet 3.0 Mt And St Graphite Center Differential Plate - 1pc - GPM GBST038B"

Upgraded graphite centre differential plate for Bullet 3.0

This aftermarket graphite centre differential plate is built for the HPI Bullet 3.0 MT and ST platform and supplied as 1 pcs. The unit replaces the stock centre plate to provide a different flex profile and thermal characteristic inside the differential.

The graphite insert alters the centre diff's behaviour under drive and over extended running, offering a distinct tuning path for 1/10 scale electric Monster Truck (MT) and Stadium Truck (ST) setups. Use it as part of incremental diff tuning to dial in handling.

Installation notes: rebuild the centre diff in the truck's specified order, check the plate clearance within the diff housing and with adjacent plates, and use the manufacturer's recommended diff grease and torque settings for screws. Verify orientation and gear mesh before final use.

Test on a controlled run to evaluate the change in handling after installation.

Do I need to change diff grease when fitting this plate?

It is recommended to use the diff grease suggested by your vehicle maker when reinstalling the diff, as grease type affects slip and temperature along with the plate material.

Will drivetrain wear be affected?

Graphite changes contact characteristics but normal maintenance and correct assembly will keep wear within expected limits for hobby use.

What should I check after installation?

Check plate seating, clearances, gear mesh and that screws are torqued correctly. Run the truck gently first to confirm there is no binding.

Copyright © 2008-2026 rcjaz.com.au All rights reserved