HPI Bullet 3.0 MT/ST Front Tyre and Beadlock Rim Replacement Set BMT1003F+889 by GPM  [BMT1003F+889]

Front tyre and beadlock replacement for HPI Bullet 3.0 MT/ST

This aftermarket set provides rubber front tyres mounted on nylon rim frames with alloy 10-pole beadlock rings and includes 12x9mm drive adapters for use on HPI Bullet 3.0 MT and ST nitro chassis. It is intended as a scale-correct replacement that restores front steering feel and supports straightforward tuning.

Fitting involves removing the stock front wheels, installing the supplied 12x9mm drive adapters to the existing hex or axle, seating the tyre on the nylon rim, then securing the alloy beadlock ring with the supplied screws. Verify adapter fit to your hubs prior to running.

For setup work the beadlock construction makes tyre seating and small stagger adjustments easy while the nylon rim frames reduce the risk of impact damage. The alloy 10-pole beadlock ring secures the tyre for more consistent steering on mixed terrain. Regularly check beadlock bolts and adapter tightness after track sessions.

Suited for replacing worn front tyres or testing minor front-end setup changes on HPI Bullet 3.0 MT/ST nitro models; avoid over-torquing adapters and recheck fasteners after initial runs.