HPI Savage 21 Shock Connector with 1.4mm Damper Spring 113mm SAVSP11314 by GPM  [SAVSP11314]

HPI Savage 21 Connector + 1.4mm Damper Spring (113mm) - 1pr - GPM SAVSP11314
Price:
AUD$7.66
Brand:
GPM
Model:
SAVSP11314
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Overview - Connector and Damper Spring

This aftermarket connector pairs with a 1.4mm wire damper spring cut to a 113mm free length, intended for HPI Savage 21 shock maintenance and straightforward tuning tasks. The assembly links shock components and supplies a spring element for direct replacement.

Fitting is aimed at hobbyists who perform routine Savage 21 maintenance: the connector replaces the linkage interface while the spring swaps into compatible shock bodies. Before final assembly confirm rod diameter, retainer fit, and verify travel and preload to maintain correct suspension operation.

From a tuning perspective the part alters damping response via spring stiffness and stack length adjustments. It is suitable for changing ride height, refining rebound, or replacing aged spring hardware on both casual and track-focused Savage 21 builds.

Is extra hardware needed to install this part?

No additional hardware is typically required if your shock uses standard retainers and the shaft diameter matches; keep a set of small pliers and thread locker handy for assembly.

How do I confirm the 113mm measurement?

Measure the spring at rest from end to end; the free length should be approximately 113mm as stated.

Will this change my ride height?

Altering spring length or stiffness can affect ride height and sag; make incremental changes and recheck handling before full run sessions.

Copyright © 2008-2026 rcjaz.com.au All rights reserved