HUDY 106060 Extra Hard 2.5x10 Drive Shaft Pins Replacement 4pcs  [HSP-106060]

HUDY 106060 - SET OF Replacement Drive Shaft Pins 2.5x10 - Extra Hard (4)
Price:
AUD$26.91
Brand:
HUDY
Model:
HSP-106060
Condition:
Brand New
Write a review

2.5x10 pin set for setup and testing

The HUDY 106060 kit includes four Extra Hard drive shaft pins sized 2.5x10 for RC drive systems. The greater hardness changes shear characteristics and durability compared with standard pins, which can be helpful when tuning drivetrain behavior.

To fit correctly, confirm the 2.5mm diameter and 10mm length are the intended dimensions for your shaft grooves. Press the pin in squarely, then verify free rotation and correct axial play. Because the pins are harder, expect increased shear resistance and altered wear on mating parts; inspect those parts when swapping pins.

Use these pins as direct replacements when the 2.5x10 specification is required and keep spare sets handy to compare failure points while adjusting setups. Never force a pin into an undersized hole to avoid damaging shafts or cups.

Specifications

  • Item Replacement Drive Shaft Pins 2.5x10 - Extra Hard (4pcs)
  • Material Extra Hard
  • Model Number 106060
  • Compatibility 2.5x10 drive shaft applications

Install in matching 2.5x10 housings to restore secure retention and to evaluate different failure characteristics during tuning sessions.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What comes in the 106060 pack?

Four 2.5x10 pins with an Extra Hard finish for direct replacement use in compatible drive shafts.

Can I use these pins to change failure behavior?

Yes. Switching to harder pins raises shear strength and can move the failure point elsewhere in the drivetrain, which is useful during tuning trials.

Do harder pins require different maintenance?

Inspect mating cups and shafts more frequently after upgrading, since harder pins can promote increased wear on softer components.

Best practice for pressing pins in?

Ensure alignment when pressing pins and confirm there is no binding. Avoid forcing pins into holes that are visibly undersized.

Will these pins fit every 2.5mm shaft?

They are standard 2.5x10 pins; you should still verify groove depth and clearance on your specific shaft before installation.

Should I keep spares trackside?

Keeping a 4pc spare set is recommended for quick swaps and for testing different pin hardness during tuning sessions.

Copyright © 2008-2026 rcjaz.com.au All rights reserved