HUDY 296542-K Black Titanium M4 Wheel Nuts with Serrated Flange (4 pcs)  [HSP-296542-K]

HUDY 296542-K - Titanium NUT M4 With Serrated Flange - Black (4)
Price:
AUD$37.35
Brand:
HUDY
Model:
HSP-296542-K
Condition:
Brand New
Write a review
alt="HUDY 296542-K - Titanium NUT M4 With Serrated Flange - Black (4)" title="HUDY 296542-K - Titanium NUT M4 With Serrated Flange - Black (4)"

Serrated-flange M4 nut for aggressive driving

The HUDY 296542-K wheel nut combines titanium material with a serrated flange to enhance grip against the wheel or hub face, improving resistance to vibration-induced loosening. The corrosion-resistant nature of titanium suits frequent running and exposure.

To install, hand-start the nut on M4 studs until the flange seats, then tighten using the proper hex driver while avoiding over-torquing. The serrated detail helps preserve wheel retention through jumps and hard cornering where loads are higher.

Sold as a set of four, these nuts are intended strictly for M4-threaded wheel studs and should be used within normal RC component limits.

Product Specifications

  • Item: Titanium NUT M4 With Serrated Flange - Black (4)
  • Material: Titanium
  • Model Number: 296542-K
  • Compatibility: R/C wheel hubs and wheel studs with M4 threads

Choose these nuts when reliable M4-thread wheel fastening and corrosion resistance are required, and always adhere to your chassis maker's guidance on torque and checks.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will the serrated flange damage aluminium hubs?

The serrated flange can bite slightly into softer hub surfaces to increase grip; inspect hub finish after first fits and consider using a thin washer if surface marking is a concern.

Do these nuts affect wheel balancing?

The nuts are lightweight and should not noticeably change wheel balance; always check balance after any hardware change if precise tuning is required.

Are these compatible with wheel hex adapters?

They are compatible with any setup that uses M4-threaded studs; confirm your hex adapter or wheel uses M4 threads before fitting.

Can I use additional locking methods with these nuts?

You may use supplementary locking measures if desired, but ensure any added washer or lock does not prevent the serrated flange from seating correctly.

Copyright © 2008-2026 rcjaz.com.au All rights reserved