HUDY 992455 Titanium 55mm Adjustable Turnbuckle M4 L/R (2)  [HSP-992455]

Price:
AUD$28.41
Brand:
HUDY
Model:
HSP-992455
Condition:
Brand New
Write a review

Setup-focused 55mm titanium turnbuckle

The HUDY 992455 turnbuckle serves as a tuning link for R/C vehicles that need precise adjustments to tie-rods and steering links. Constructed from titanium, it offers a 55mm nominal body length with M4 threads and is supplied as a left- and right-threaded pair so you can adjust length smoothly by rotating the center section.

To fit, remove the old rod ends, screw the turnbuckle into the existing ball studs or rod ends, then turn the body to reach the desired length and lock any jam nuts or retainers in place. The mirrored threads let you lengthen or shorten without moving mounting points, which simplifies setup changes trackside.

Use this part to incrementally alter toe, bump steer, and front/rear link symmetry; small, repeatable changes help tune handling without replacing larger chassis pieces.

Specifications

  • Item: Titanium adjustable turnbuckle
  • Material: Titanium
  • Model Number: 992455
  • Length: 55mm
  • Thread: M4
  • Handedness: Left/Right
  • Quantity: 2 pcs

A compact, track-ready option for precise, repeatable link-length adjustments where M4 fittings are standard.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does changing turnbuckle length affect toe and handling?

Small length changes alter toe and steering geometry, which can tighten or loosen turn-in and mid-corner balance; adjust incrementally and test.

Can I use this to correct asymmetric link lengths?

Yes, matched left/right threads make it straightforward to equalize left and right link lengths for symmetric setup and predictable handling.

Is the 55mm length a nominal measurement or end-to-end?

The 55mm figure refers to the nominal body length used for selection; actual installed length depends on ball stud and rod-end geometry.

Any setup tips for quick trackside adjustments?

Mark a reference position on the body, use a small spanner on jam nuts to lock settings, and adjust in small increments while logging changes for repeatability.

Copyright © 2008-2026 rcjaz.com.au All rights reserved