Inferno NEO 3.0/4.0 Engine Mount Plate t=4.0 - Kyosho IF290B  [KY-IF290B]

Kyosho IF290B - Engine Mount Plate(t=4.0/L,R)
Price:
AUD$16.17
Brand:
Kyosho
Model:
KY-IF290B
GTIN:
4548565514502
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $13.66 each $5.01 or 15%
3+ $12.98 each $9.56 or 20%
Write a review

Precision Mounting Plate for Inferno NEO Models

The IF290B engine mount plate is supplied as left and right halves (L/R) and carries the t=4.0 thickness designation. As a Kyosho IF290B spare, it interfaces the nitro engine with the chassis on Inferno NEO 3.0 and 4.0, delivering a rigid mounting datum and reliable alignment for engine replacement or servicing.

Fitment guidance: the plate is produced to match the bolt pattern and spacing of Inferno NEO platforms; keep the factory mounting hardware and confirm left/right orientation before final tightening. Typical installation steps include taking off the top deck and aligning the motor flange to achieve correct spur and pinion mesh with the gearbox.

Maintenance and tuning: replacing the mount plate can restore correct engine placement after crashes or wear and serves as a stable baseline when changing engine setback or radiator clearance. Use appropriate tools to secure hex fasteners and recheck alignment after a break-in run.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is IF290B the correct spare for both NEO generations?

IF290B is made to fit the engine mounting layout on Inferno NEO 3.0 and Inferno NEO 4.0, so it serves both generations that use the same bolt pattern.

Will changing thickness alter gearing alignment?

Plate thickness affects the engine's fore-aft position slightly; confirm t=4.0 matches your setup and check spur/pinion mesh after fitting to ensure correct gearing alignment.

How to avoid engine tilt when fitting the plate?

Hand-tighten mounting screws to hold the halves, align the motor flange square to the gearbox, set the mesh, then tighten screws evenly to avoid introducing tilt.

Copyright © 2008-2026 rcjaz.com.au All rights reserved