INFERNO NEO Steering Linkage Set IF289C for 3.0 & 4.0 by Kyosho  [KY-IF289C]

Kyosho IF289C - Linkage Set(NEO)
Price:
AUD$30.54
Brand:
Kyosho
Model:
KY-IF289C
GTIN:
4548565513796
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $24.19 each $12.69 or 21%
3+ $22.98 each $22.67 or 25%
Write a review

NEO Series Steering Linkage

This linkage set offers aftermarket spare pieces that fit the INFERNO NEO chassis without modification, allowing quick replacement of damaged steering and suspension links. It mounts to the original points on INFERNO NEO 3.0 and INFERNO NEO 4.0 models.

The components bring back intended link geometry and steering response after wear or impact. When installing, double check ball cup seating and threaded connections, making sure each joint articulates freely throughout its range.

Typical installation requires removing the existing linkage runs and refitting the replacement parts using the vehicle's current hardware. After fitting, check alignment and endplay, then run a brief low-speed test to confirm handling before normal use or track sessions.

Specifications Overview

  • Item: Linkage Set (NEO)
  • Material: Not specified
  • Model Number: IF289C
  • Compatibility: INFERNO NEO 3.0 & 4.0

Fit this replacement linkage set to retain factory steering and suspension geometry on INFERNO NEO 3.0 and 4.0 models for consistent handling.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does swapping these links change tuning?

Replacing bent or stretched links restores the intended geometry, which can tighten steering feel and improve predictability. For tuning, ensure geometry checks are repeated after any changes.

Any quick checks before a practice run?

Confirm steering travel, no binding at full lock, and that all rod ends move freely. Also re-check toe and steering trim after fitting new links.

Can I reuse the original fasteners?

Yes, the kit is designed to use the vehicle's existing connectors and fasteners unless those items are damaged, in which case replace them with appropriate hardware.

Should I re-check geometry after a few runs?

Yes. After a short break-in run check alignment and endplay again, as fasteners can settle and reveal minor play after initial use.

Copyright © 2008-2026 rcjaz.com.au All rights reserved