Inner-Thread Steering Block Pivot Pins, 2 pcs - XRAY 352292-S  [XR-352292-S]

XRAY 352292-S Steel Steering Block Pivot Pin with Inner Thread (2)
Price:
AUD$31.49
Brand:
XRAY
Model:
XR-352292-S
Condition:
Brand New
Write a review

Quick-service threaded steering pivot

This steering block pivot pin is engineered for RC linkages that rely on inner-thread retention. The inner-threaded design makes service swaps faster, and the hardened steel construction targets extended wear life under frequent adjustment.

Each package contains 2 pcs for applications where a threaded pivot pin is listed by the chassis or parts reference. The pins act as the rotational axis for steering knuckles and help preserve steering geometry when correctly installed.

Fitting is simple when paired with the matching threaded retainer: push the pivot pin into place, screw in the mating retainer, and confirm free knuckle movement with no excess play. Always verify thread engagement and follow the chassis guidance for torque or retention procedures to avoid loosening in use.

Specifications

  • Item Steel Steering Block Pivot Pin with Inner Thread, 2 pcs
  • Material Hardened steel
  • Model Number 352292-S
  • Compatibility Refer to XRAY parts list or the chassis manual for fitment details

A compact, service-minded pivot pin set that balances hardwearing material with the convenience of inner-thread retention for RC steering systems.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Do I need special tools to fit them?

Basic hand tools are usually enough; a small driver to engage the retainer and a feel for proper seating will do. Avoid overforce when engaging threads.

What torque should I use on the retainer?

Follow the chassis manufacturer recommendations for retainer torque where provided; the aim is secure engagement without compressing or binding the knuckle.

Are the threads a common size?

Thread size and pitch vary by chassis. Confirm compatibility with your model using the XRAY parts list or manual before installation.

Will these change steering feel?

When fitted correctly, the pins are intended only to provide a stable pivot; any change in feel typically results from worn components or incorrect installation rather than the pins themselves.

Copyright © 2008-2026 rcjaz.com.au All rights reserved