Intellect IP-HW2S5600V5-50C 7.4V 5600mAh Performance LiPo Pack  [IP-HW2S5600V5-50C]

Intellect (IP-HW2S5600V5-50C) - 7.4V 50C 5600mah Lipo Battery
Price:
AUD$86.29
Brand:
Intellect
Model:
IP-HW2S5600V5-50C
Condition:
Brand New
Write a review

Reliable Track Power in a Hard Case

The Intellect (IP-HW2S5600V5-50C) 7.4V 50C 5600mAh LiPo is aimed at hobbyists who want dependable output without fuss. The hard-case design helps protect the cells when swapping packs between runs.

Sustained Output for Racing

A 50C continuous discharge rating keeps voltage sag low under heavy load, while the 5600mAh capacity affords longer sessions between charges. That makes the pack suitable for sprint racing and longer practice blocks.

Compatibility Tips

The pack uses a Deans T discharge plug and an XH2.5 balance connector, which are widely supported by ESCs and chargers. With dimensions of 137.8x46.8x25mm it is compatible with many 1/10 and 1/8 chassis but check clearance and strap positions when fitting.

Specifications

  • Voltage: 7.4V
  • Capacity: 5600mAh
  • Discharge Rate: 50C
  • Connector Bal: XH2.5
  • Connector Discharge: Deans T plug
  • Pack Dimension: 137.8x46.8x25mm
  • Case Type: Hard Case

Ideal for RC enthusiasts who demand high performance and reliability, this battery is a practical choice for enhancing your racing experience.

How long will the battery last on a single charge?

Run time depends on motor, gearing and driving style, but the 5600mAh capacity typically gives longer sessions than lower-capacity 2S packs under similar conditions.

Is the hard case worth using over soft packs?

A hard case offers extra protection against abrasion and pressure during transport, which can help preserve pack shape and connector integrity over time.

Can I parallel this pack with others?

Only parallel identical packs with matching voltage, capacity and internal resistance, and follow safe procedures for parallel connections. If unsure, consult your charger or club guidance.

Do I need a special balancer lead adapter?

The XH2.5 balance lead is common on many chargers, so no adapter is usually required. If your charger uses a different balance plug, use a correct adapter to ensure proper balancing.

Copyright © 2008-2025 rcjaz.com.au All rights reserved