KC10 5.8mm Pivot Ball Replacement Pack CL028 by Kyosho  [KY-CL028]

Kyosho CL028 - Pivot Ball 5.8mm (KC10/8pcs)
Price:
AUD$8.80
Brand:
Kyosho
Model:
KY-CL028
GTIN:
4548565513239
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $7.80 each $2.00 or 11%
3+ $7.41 each $4.18 or 16%
Write a review

KC10 Linkage Pivot Balls

These Kyosho CL028 pivot balls come in an 8pcs pack and are sized at 5.8mm for use on KC10 chassis steering and suspension joints. They are supplied as model-scale replacement parts to restore correct linkage interfaces on the KC10 platform.

Fit the set to sharpen steering response and reduce slack that develops through regular use. When performing maintenance, inspect cups, rod ends, and surrounding hardware for wear, replace any compromised parts, and keep seating surfaces free of debris to maintain suspension geometry. Timely replacement will help keep handling and tuning predictable.

Installation is straightforward as part of front-end or suspension service: remove the affected linkage, replace or transfer the ball into the cup or rod end, then reassemble and verify smooth articulation. After installation, confirm alignment and adjust as needed to ensure full, unobstructed travel.

Compatibility

  • KC10 chassis
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What does the 5.8mm spec control in performance?

The 5.8mm diameter determines joint clearance and contact area; correct sizing helps keep steering input direct and prevents unwanted free play.

Is an 8pcs pack enough for a full refresh?

Eight pieces typically cover multiple linkage points or provide spare parts for routine servicing, depending on your vehicle layout.

How often should I inspect these pivot balls?

Check pivot balls during regular suspension checks or after heavy use; replace at the first sign of looseness or wear to maintain handling consistency.

Copyright © 2008-2026 rcjaz.com.au All rights reserved