KC10 Compatible Steering Servo - Kyosho 82283  [KY-82283]

Kyosho 82283 - Servo KS60111-15M
Price:
AUD$0.00
Brand:
Kyosho
Model:
KY-82283
GTIN:
4548565513369
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Kyosho - KC10 Chassis category
Write a review

Replacement steering servo made for KC10 use

This Kyosho spare serves as a direct replacement steering servo for the KC10 chassis, intended to maintain steering function in scale RC applications without extra complexity. The copy emphasises practical fitment rather than detailed performance claims.

Compatibility: intended as a KC10 series spare; inspect the physical mounting points and plug orientation to ensure compatibility with your KC10 servo bay before installation.

Installation notes: remove the existing servo while recording horn alignment and linkage geometry. Install the replacement using the original screw locations, confirm the servo is centred, then reconnect linkages and verify steering travel and direction on the transmitter.

Tuning role: the replacement restores steering control and allows standard recalibration of neutral and travel endpoints, helping preserve predictable handling on the KC10 chassis.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is the fit identical across KC10 versions?

This unit is specified as a KC10 spare. Before fitting, check that the mounting ears and connector match your KC10 variant to prevent misalignment during installation.

What is the recommended installation workflow?

Document the servo horn position, centre the new servo via your transmitter, secure it with the original screws, then reconnect the linkage and perform a functional steering test to confirm correct operation.

Should I change radio endpoints after replacing the servo?

Usually only endpoint and centring adjustments are necessary. Use the transmitter to fine tune travel limits and trims to match the handling you expect from the KC10 setup.

Copyright © 2008-2026 rcjaz.com.au All rights reserved