KC10 Performance Shock Set CL014 - Kyosho  [KY-CL014]

KC10 shock function and setup

This Kyosho CL014 shock pack is supplied as a 4pcs spare kit for the KC10 chassis, intended for suspension service and setup adjustments. It serves as a like-for-like replacement for KC10 hobby models and is suitable for tuning sessions as well as basic maintenance.

Fitment matches KC10 specifications; always confirm shock mounting spacing and rod end type on your vehicle before fitting. Typical installation: remove wheel or body panels as necessary, detach both shock mounting points, replace the unit, and verify full suspension articulation and clearance.

Tuning impact: these shocks establish mounting geometry and stroke that interact with springs, preload collars, and damping choices. When chasing handling improvements, adjust spring rate and ride height first, then refine shock positions and angles to target pitch and roll balance.

On wear: inspect shafts, eyelets and fasteners for looseness after installation and verify uniform travel on left and right sides. Keep the 4pcs CL014 set as on-hand service spares to minimise downtime during events.