Kyosho made 1/27 MINI-Z AWD DODGE CHALLENGER SRT HELLCAT REDEYE B5 Blue (32621BL) MINI-Z MA-020 On-Road RTR (Ready-to-Run)
Generate its powerful performance to more motorists, the MINI-Z AWD happens to be available in a Readyset. The MA-020 chassis features VCS (variable camber suspension system system) in the front side that optimizes camber modification with suspension system system move and a specially developed circuit board. The framework design allows area for installing the optional MZW446 gyro unit. The gyro is modified by switching a little bit regarding framework to reflect the total amount of steering modification answering alterations in framework position, permitting novices all the way through to specialists to use a vehicle to their complete potential. Completely fitted away with accuracy ball bearings, the high drive effectiveness with this MA-020 framework is complimented inside Readyset by the first scale human anatomy and 2.4GHz Syncro KT-531P R/C system that may need no regularity musical organization environment; all at an excellent value cost. Simply set the batteries to take pleasure from the thrill of drift driving utilising the included set of drift tires. The chassis works together with nearly all ASC MINI-Z systems (additional components perhaps required for somebody designs). The MINI-Z AWD promises an exceptional world of dramatic racing action so that you can experience and luxuriate in.
●MINI-Z AWD Readyset centered on MA-020 framework.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitiveness modification function.
●Drift tires are set up as standard.
●Readyset calls for simply batteries to be prepared to use it!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of regularity bands.
●Factory finished body is sold with display model quality finish.
●Features VCS (variable camber suspension system) that adjusts camber prior to suspension system move.
●Coil spring on front suspension system system can be just changed without tools.
●wide selection of optional components can be acquired become installed.
●(Note) Optional ICS cannot be utilized. Additionally, this model is specifically created for the KT-531P transmitter. It isn't right for the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is actually just suited to the unique gyro unit (offered separately).
The ‘Hellcat’ could be the pure definition of US muscle tissues. Featuring its 6.2ℓV8 supercharged engine producing a brutal 797 horsepower, the Hellcat could be the superior form of Dodge Challenger lineup.
Includes trendy design of Syncro KT-531P transmitter. Features steering / throttle trim as well as twin price modification of steering angle and control the flashing speed of optional LEDs. Also, the transmitter has an exercise Mode function which limits speed associated with the car for easy learning (standard environment during delivery is knowledge Mode).
Unique AWD Sports framework will depend on the MA-02 framework and features the RA45 item.
Features VCS front suspension system that optimizes camber enhancement together with suspension system swing. Replacement of front suspension system coil springs is simple without any tools required.
Constructed with strut-type rear suspension.
Complete bearing specifications consist of 14 ball bearings.
Designed with drift tires as standard.
Constructed with special mount area and gyro adjustment amount the optional MZW446 gyro item (provided separately).
TECHNICAL DATA
- Length 171.0mm
- Width 75.0mm
- Height 50.0mm
- Chassis MA-020-W
- Wheelbase 98.0mm(LL)
- Tread F : 64.5mm R : 62.0mm
- Tire F : 25.0mmx8.5mm R : 25.0mmx11.0mm
- Gear ratio 7.236.385.715.975.344.974.5:1
- Front Wheel Offset Narrow +1.5mm
- Rear Wheel Offset large +1.5mm
- R/C System Syncro KT-531P
- Weight 193g
KIT CONTENT
- R / C unit integral complete framework
- Painted and marked complete human anatomy
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- free nut
- Wheel wrench
- Pinion reduction tool
REQUIREMENT TO USE
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter
