Kyosho made 1/27 MINI-Z AWD Honda Neo Classic Racer (32625GM) MINI-Z MA-020 On-Road RTR (Ready-to-Run)
To produce its powerful performance to more motorists, the MINI-Z AWD is actually obtainable in a Readyset. The MA-020 framework features VCS (variable camber suspension system) regarding front part that optimizes camber modification with suspension system swing and a specially produced circuit board. The framework design allows area for installing the optional gyro unit(Sold separately:MZW446). The gyro could possibly be modified by turning a small quantity regarding framework to reflect the total amount of steering correction responding to alterations in chassis position, allowing novices right through to specialists to push using their full potential. Entirely fitted away with accuracy ball bearings, the high drive effectiveness for the MA-020 chassis is complimented in the Readyset by the initial scale human anatomy and 2.4GHz Syncro KT-531P R/C system that requires no regularity musical organization environment; all at a fantastic value cost. Merely set the batteries to relish the thrill of drift driving due to the included set of drift tires. The framework works with using the most of ASC MINI-Z systems (additional parts perhaps needed for somebody designs). The MINI-Z AWD guarantees an exceptional world of dramatic competition action for you really to experience and luxuriate in.
●MINI-Z AWD Readyset considering MA-020 framework.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitiveness modification function.
●Drift tires are installed as standard.
●Readyset calls for only batteries become ready to use it!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of regularity bands.
●Factory finished human body includes display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber prior to suspension system system move.
●Coil springtime on front suspension can be easily changed without tools.
●wide selection of optional elements is available become installed.
●Note) Optional ICS can not be used. Also, this model is particularly created for the KT-531P transmitter. It's not appropriate for the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. Its just suitable for the initial gyro device (offered individually:MZW446).
The Neo Vintage Racer is a custom model featuring a particular retro cowl on Honda’s S660 ‘light automobile’ with a mid-ship motor layout. This model made a wonderful impact at its 2019 Tokyo automobile Salon presentation.
Includes stylish design of Syncro KT-531P transmitter. Features steering / throttle trim additionally double rate modification of steering angle and control function LEDs. Also, the transmitter has a Training Mode function which limits rate of this vehicle for easy learning(standard establishing during delivery is Training Mode).
Unique AWD Sports framework is based on the MA-02 framework and features the RA45 product.
Features VCS front suspension system that optimizes camber improvement in concert with suspension system system move. Replacement of front suspension system system coil springs is easy without tools required.
Designed with strut-type back suspension system.
Complete bearing specifications consist of 14 ball bearings.
Designed with drift tires as standard.
Loaded with special mount room and gyro modification volume the optional gyro unit (offered individually:MZW446).
TECHNICAL DATA
- Length 150.0mm
- Width 70.0mm
- Height 50.5mm
- Wheelbase 94.0mm(L)
- Tread F : 59.5mm R : 59.5mm
- Chassis MA-020-N
- Front Wheel Offset Narrow +1.5mm
- Rear Wheel Offset Narrow +1.5mm
- R/C System Syncro KT-531P
- Weight 170g
KIT CONTENT
- R / C unit integral complete framework
- Painted and marked complete body
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- free nut
- Wheel wrench
- Pinion eradication device
REQUIREMENT TO OPERATE
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter
