Kyosho - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/8500KV) #32890  [KY-32890]

While maintaining areas of the superb MR-03 design, the modern MR-04EVO2 chassis achieves significant performance improvements with modifications towards front suspension system and a lowered C of G that work with synergy with a sensored brushless engine. Both slim and wide tread settings is found by changing the lower and top dishes about the front part combined with the steering tie pole. Adjustable wheelbase enables framework establishing according to physical stature.

- While camber angle is optimized during cornering utilizing the move for the current top supply design, leading suspension system utilizes the modern kingpin-integrated knuckle to boost camber stability. Geometric modification of caster and course etc. provides more linear maneuverability. Amazing spec front part springs the MR-04 with different hardness are available as options.

- Front knuckle design features included kingpin with optimized approval using the kingpin ball for smoother procedure. Ball bearings were changed to 3mm internal diameter for reduced rotational opposition.

- All 7 ball bearings are 3mm interior diameter for lower rotational opposition to attenuate friction loss.

- paid off mounting for the AAA batteries on framework understands a decreased center of gravity set alongside the MR-03. In combination with the chassis form, this improves safety through corners along with boosting speed and control.

- Ball differential included as standard optimizes the rotational distinctions when considering remaining and right back tires when switching. Additionally provides moderate slip action to boost traction whenever exorbitant load is applied. Silver clear anodized finish to aluminum components creates a formidable design to complement performance.

- This new unit in addition supports high-speed conversation with different high-end transmitters and receivers to comprehend unprecedented control response. Achieves transmission rates of 0.99ms with KO devices (ADV mode) and 0.9ms with Futaba devices (EVO2 mode). *Previously 2.6ms ~ 3.0ms

TECHNICAL INFORMATION

• Length 124.5mm
• Width 72-76mm
• Height 31mm
• Motor Mount MM
• Wheelbase 98.0mm (LL)
• Tread(F/R)63.5-65.0mm/61.5-65.0mm
• Gear Ratio 7.3/6.3/5.5/4.9:1
• Weight 135.5g (Body / tires / wheels perhaps not included.)
• Motor KYOSHO SPEED HOME XSPEED 85 (KV8500)

KIT CONTENT

• MR-04 EVO2-W-MM Factory assembled framework with KYOSHO SPEED HOME KV8500 brushless motor
• Parts set for changing front part tread
• 6T/7T/8T/9T Pinion gears
• Wheel wrench
• Tools for pinion gears
• Spare wheel peanuts

REQUIREMENT TO EXECUTE

• Transmitter
• Receiver product (suitable for EVO/EVO2)
• ASC
• AAA x 4 batteries for chassis
• Batteries for transmitter