Kyosho 32891 MINI-Z Racer MR-04EVO2 Chassis Set W-MM 5600KV - Competition Ready Mini-Z Chassis  [KY-32891]

Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)
Price:
AUD$311.70
Brand:
Kyosho
Model:
KY-32891
GTIN:
4548565458707
Condition:
Brand New
Available in warehouse
Write a review
alt="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)" title="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)"
alt="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)" title="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)"
alt="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)" title="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)"
alt="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)" title="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)"
alt="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)" title="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)"
alt="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)" title="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)"
alt="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)" title="Kyosho 32891 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/5600KV)"

Kyosho MR-04EVO2: Precision Mini-Z chassis for competitive running

For racers chasing consistent lap times, the Kyosho MR-04EVO2 refines the Mini-Z layout with performance-oriented changes. Based on MR-03 roots, the EVO2 adds front suspension tweaks and a sensored brushless drive to lower roll and sharpen directional control.

Improved front suspension layout

The updated knuckle and kingpin arrangement help maintain camber through bends, while revised caster and trail improve steering linearity. The design supports narrow and wide tread configurations via swap plates and steering parts, and the adjustable wheelbase helps match bodies to circuit demands.

High fidelity steering and I.C.S. options

Steering response benefits from a redesigned potentiometer and upgraded steering firmware for tighter, repeatable inputs. I.C.S. software allows granular tuning of steering characteristics, and the standard ball differential aids even torque distribution to the rear wheels for cleaner exits.

Performance specs

Specifications

  • Length: 124.5mm
  • Width: 72-76mm
  • Height: 31mm
  • Wheelbase: 98.0mm (LL)
  • Tread (F/R): 63.5-65.0mm / 61.5-65.0mm
  • Gear Ratio: 7.3/6.3/5.5/4.9:1
  • Weight: 135.5g (without body/tires/wheels)
  • Motor: KYOSHO SPEED HOUSE XSPEED 56 (KV5600)

The Kyosho MR-04EVO2 is engineered for drivers who value setup control and consistent handling, making it a solid platform for club and regional competition.

Will the standard motor give competitive power at my local track?

The KYOSHO SPEED HOUSE XSPEED 56 (KV5600) motor provides strong, predictable power for most club tracks. Fine tuning gear ratio and differential settings helps tailor acceleration to your track layout.

Is the MR-04EVO2 easy to tune for oversteer or understeer?

Yes. Use tread width and wheelbase to influence turn-in, and adjust differential preload and steering curves via I.C.S. to dial out understeer or oversteer depending on conditions.

How compatible is the chassis with aftermarket parts?

The platform accepts many common Mini-Z upgrades like steel turnbuckles, ball bearings and alternative steering arms. Check fitment for larger servos or wider bodies before finalising changes.

Do I need special tools to change the front geometry?

No special tools are required beyond a basic hex driver set and small pliers. Interchangeable plates and steering parts are designed for quick swaps during setup sessions.

What routine checks should I perform before a race?

Check wheelbase and tread hardware, inspect bearings and diff for wear, confirm servo centring and test steering response with a short practice run to verify handling balance.

Copyright © 2008-2025 rcjaz.com.au All rights reserved