Kyosho 34321 LAZER 1/10 EP 4WD Dirt Cross Buggy Assembly Kit - Off-Road Favourite  [KY-34321]

Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD
Price:
AUD$375.39AUD$411.15
Brand:
Kyosho
Model:
KY-34321
GTIN:
4548565471324
Condition:
Brand New
Available in warehouse
Write a review
alt="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD" title="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD"
alt="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD" title="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD"
alt="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD" title="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD"
alt="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD" title="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD"
alt="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD" title="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD"
alt="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD" title="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD"
alt="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD" title="Kyosho 34321 - 1/10 EP 4WD Buggy Assembly kit LAZER SB Dirt Cross 4WD"

Kyosho LAZER 34321 - Durable 1/10 Dirt Buggy

The Kyosho LAZER 34321 offers a robust electric buggy platform for off-road enthusiasts. Built with attention to fit and finish, it suits racers and hobbyists who want a competent kit to tune and race.

Structural design and track behaviour

Known for a stout build and predictable handling, the LAZER 34321 measures 395mm long and 245mm wide, delivering a compact footprint that stays stable over bumps. Its 268.5mm wheelbase helps with directional stability while the 209mm front and 201mm rear tread widths support improved turning traction.

Powertrain balance and mass

The 8.13:1 gear ratio on this model strikes a sensible compromise between top speed and low-end pull for off-road conditions. Weighing about 1450g, the chassis provides a level of planted feel. The tyre setup of 88x33mm front and 88x40mm rear helps sustain traction across varied surfaces.

Specifications

  • Length: 395mm
  • Width: 245mm
  • Height: 125mm
  • Wheelbase: 268.5mm
  • Tread (F/R): 209mm/201mm
  • Tire Size (F/R): 88x33mm / 88x40mm
  • Gear Ratio: 8.13:1
  • Weight: Approx. 1450g

If you want a dependable chassis for club racing and tuning, the Kyosho LAZER 34321 gives a strong foundation for competitive off-road use.

Will the Kyosho LAZER 34321 accept common aftermarket upgrades?

Yes. Many racers fit upgraded shocks, quicker servos and different gear ratios to tailor handling and response for specific tracks.

What radio specs are recommended for this buggy?

A reliable 2-3 channel transmitter with a mid-to-fast steering servo is typical. Choose a radio offering clear response and good range for club tracks.

Does the kit require special tools to build?

Basic hobby tools cover most of the build: hex drivers, pliers, thread-lock where needed and light greases. Soldering equipment is useful for electronics installation.

How should I set up shocks for dusty tracks?

Use slightly heavier shock oil to control rebound, seal shock boots if available, and check seals regularly to keep grit out of the dampers.

Copyright © 2008-2025 rcjaz.com.au All rights reserved